Abstract:Lithium-ion batteries are widely used today in powering devices from portable electronics to electric vehicles. Despite their great success, this battery chemistry relies on organic solvent-based liquid electrolytes which are highly flammable, leading to major safety concerns. In contrast, solid-state batteries, which are based on solid-state electrolytes, are regarded to have much better safety characteristics and potentially higher energy density than the conventional lithium-ion batteries. Solid-state electrolytes usually include ceramics, polymers, gels, and composites. Among them, polymer materials have attracted considerable attention due to their great interfacial contact, flexibility, and easy fabrication. In particular, polyvinylidene fluoride (PVDF) polymer electrolyte is a promising candidate as it can potentially provide a high voltage window and enable high energy density solid-state batteries. However, the current PVDF-based polymer electrolyte is still not compatible with high voltage cathodes, such as layered lithium transition metal oxides and the interaction between the salt and PVDF polymer has not been fully elucidated. We have systematically studied the PVDF-based electrolytes with different salts and salt combinations, including lithium bis(fluorosulfonyl)imide (LiFSI), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and lithium bis(pentafluoroethanesulfonyl)imide (LiBETI). The optimized electrolyte delivers excellent performance for solid-state Li||LiFePO 4 cells, achieving a specific capacity of over 150 mAh/g and lasting more than 50 cycles with over 99% capacity retention. Similar tests have also been applied to lithium nickel manganese cobalt oxides (NMC), and the preliminary results show promising cycling stability and capacity retention. In addition to electrochemical study, we employed a range of synchrotron-based X-ray techniques, including diffraction, pair distribution function analysis, and absorption spectroscopy, to investigate the interactions between the polymer and lithium salt in the polymer electrolytes. This knowledge will provide valuable information for designing new polymer electrolyte systems. Acknowledgments: The work at Brookhaven National Laboratory was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Vehicle Technology Office of the U.S. Department of Energy through the Advanced Battery Materials Research (BMR) Program under contract DE-SC0012704. This research used beamline 23-ID-2 and 28-ID-2 of the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-SC0012704.

Research progress on the mechanism and key role of filler structure on properties of PVDF composite solid electrolyte

Composition and Structure Design of Poly(vinylidene fluoride)‐Based Solid Polymer Electrolytes for Lithium Batteries

Review on composite polymer electrolyte using PVDF-HFP for solid-state lithium-ion battery

Advanced Composite Solid Electrolytes for Lithium Batteries: Filler Dimensional Design and Ion Path Optimization

Research progress of polymer-inorganic filler solid composite electrolyte for lithium-ion batteries

The “filler effect”: A study of solid oxide fillers with β-Li3PS4 for lithium conducting electrolytes

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Research Progress on the Composite Methods of Composite Electrolytes for Solid-State Lithium Batteries

Filler‐Integrated Composite Polymer Electrolyte for Solid‐State Lithium Batteries

Advances and prospects of PVDF based polymer electrolytes

Composition Modulation and Structure Design of Inorganic‐in‐Polymer Composite Solid Electrolytes for Advanced Lithium Batteries

Tailoring Practically Accessible Polymer/Inorganic Composite Electrolytes for All-Solid-State Lithium Metal Batteries: A Review

Electrochemical and Structural Study on PVDF-Based Polymer Electrolytes for Solid-State Batteries

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

Progresses in the application of polymer fibers in solid electrolytes for lithium metal batteries

Recent progress of composite solid polymer electrolytes for all-solid-state lithium metal batteries

Incorporating lithium magnesium silicate into PVDF-HFP based solid electrolyte to achieve advanced solid-state lithium-ion batteries

Optimizing the Microenvironment in Solid Polymer Electrolytes by Anion Vacancy Coupled with Carbon Dots

Sandwich structured PVDF-HFP-based composite solid electrolytes for solid-state lithium metal batteries

Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries

La<sub>2</sub>O<sub>3</sub> Filler's Stabilization of Residual Solvent in Polymer Electrolyte for Advanced Solid‐State Lithium‐Metal Batteries