Abstract:With the increasing demand for high-performance alloys in extreme environments, there has been an active development of new materials. High-entropy alloys (HEAs) are considered a promising choice due to their exceptional properties. Even though HEAs exhibit remarkable mechanical properties, only a limited number of studies have explored the mechanical properties and microstructures of additively manufactured HEAs under extreme conditions. In this work, the dynamic mechanical properties at high strain rates and different temperatures (i.e., 293 K and 77 K), as well as quasi-static mechanical properties for the CoCrFeMnNi HEAs fabricated by selective laser melting (SLM) are investigated. Microstructure observations have demonstrated that the asprinted sample displays a single face-centered cubic (FCC) phase with a columnar dendrite feature. Within dendrites, a large number of dislocations and substructures appear due to the applied high cooling rates during the SLM process. The as-printed sample exhibits a significant strain rate dependence from quasi-static to dynamic loading during deformation. Compared to the quasi-static mechanical properties, the as-printed HEA reveals higher dynamic yield strength (e.g., 1081 MPa and 1020 MPa along the build and scanning directions under 2800 s-1, respectively), more pronounced strain-hardening behavior, and larger remarkable plasticity under dynamic loading at cryogenic temperatures. When subjected to increasing strain rates ranging from 0.001 s- 1 to 3500 s- 1 at 293 K, the yield strength of the as-printed HEAs exhibits a notable enhancement, increasing from 517 MPa to 723 MPa along the BD direction, and from 545 MPa to 667 MPa along the SD direction. The corresponding variation in the strength of the BD samples is more pronounced than that of the SD samples. The enhancement in strength should be attributed to the differences in the features of grain orientation and dislocation distribution along different build directions, as well as the strain rate dependence. During plastic deformation, the dominant mechanisms of dislocation slips and deformation twins (DTs) are transformed into multistage-twin-controlled ones at cryogenic temperatures, which is beneficial to improve the strain hardening rate and plasticity. The present studies provide a deep understanding of the deformation mechanism of HEAs under extreme conditions and help promote the application of HEAs in the future.

Tensile Behavior of CoCrFeMnNi High-Entropy Alloy with Intermediate Strain Rate Included

Dynamic impact behavior and deformation mechanisms of Cr(26)Mn(20)Fe20Co(20)Ni(14) high-entropy alloy

Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys

Strain-rate Effect Upon the Tensile Behavior of CoCrFeNi High-Entropy Alloys

Dynamic tensile behavior of Al0.1CoCrFeNi high entropy alloy: Experiments, microstructure and modeling over a wide range of strain rates and temperatures

High-temperature tensile behavior and constitutive model in Co-free Fe40Mn20Cr20Ni20 high-entropy alloy

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy

Dynamic behavior of CrMnFeCoNi high-entropy alloy in impact tension

Coupling Effect of Temperature and Strain Rate on Mechanical Properties and Deformation Mechanisms of Cr26Mn20Fe20Co20Ni14 High-Entropy Alloy

Effects of Strain Rate and Low Temperature on Dynamic Behaviors of Additively Manufactured CoCrFeMnNi High-Entropy Alloys

Strain-rate-dependent behaviors of CoCrNiSi 0 . 2 medium-entropy alloy: Deformation mechanism and microstructural-based constitutive modeling

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Mechanical Properties of AlCrFeCuNi High Entropy Alloy: A Molecular Dynamics Study

Mechanical behavior and shear band of a powder-metallurgy-fabricated CoCrFeMnNi high-entropy alloy during high strain-rate deformation

Strain-rate-dependent Behaviors of CoCrNiSi02 Medium-Entropy Alloy: Deformation Mechanism and Microstructural-Based Constitutive Modeling

Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling

Tensile mechanical properties of CoCrFeNiTiAl high entropy alloy via molecular dynamics simulations

Dynamic Tension and Constitutive Model in Fe40Mn20Cr20Ni20 High-Entropy Alloys with a Heterogeneous Structure

Strain-rate-dependent behaviors of CoCrNiSi0.2 medium-entropy alloy: Deformation mechanism and microstructural-based constitutive modeling

Effect of Temperature and Strain Rate on Quasi-Static and Dynamic Compressive Behavior of Forged CrMnFeCoNi High Entropy Alloy