Abstract:The Supercritical Carbon Dioxide Brayton Cycle (SCBC) with high efficiency is a very promising thermodynamic cycle to replace the Steam Rankine Cycle (SRC) as the power cycle of a Nuclear Hydrogen Production (NHP) system. However, detailed research on the NHP system using SCBC as a power cycle has not been carried out so far and the system's thermodynamic characteristics are not well known. To fill this research gap, three promising very high-temperature gas-cooled reactor and copper-chlorine cycle-based NHP systems using different power cycles including SRC, SCBC, and combined SCBC and Organic Rankine Cycle (ORC) are proposed and studied in this work. The energy and exergy analysis method and the particle-swarm optimization algorithm have been used respectively to model and optimize the system. In addition, a parametric analysis based on two typical reactor concepts has been performed to comprehensively investigate the system's thermodynamic characteristics. Finally, a performance comparison of three systems under different hydrogen production loads has been conducted. Major results show that under different hydrogen production loads, the variations in the thermodynamic performance of the SCBC-based NHP system are sensitive to the reactor inlet temperature. Under low reactor inlet temperatures (≤587°C), the thermal efficiency of the SCBC is less than 37%. Besides, increasing the compressor pressure ratio of SCBC can enhance the system's thermodynamic performance, and the system's thermal and exergy efficiencies are improved by about 0.7% to 3.7% and 1.0% to 5.3% respectively by using ORC. HighlightsThree VHTR and Cu-Cl cycle-based nuclear hydrogen production systems are studied.Three systems are modeled based on the energy and exergy analysis method.Parametric analysis and optimization under two reactor concepts are conducted.SCBC's thermal efficiency under low reactor inlet temperatures is less than 37%.System overall thermal efficiency is improved by about 0.7% to 3.7% through using ORC.

Thermo-economic Optimization on a Combined Heat and Power System with Supercritical Rankine Cycle for Power-to-heat Batteries

Energy, Exergy, Economic Performance Investigation and Multi-Objective Optimization of Reversible Heat Pump-Organic Rankine Cycle Integrating with Thermal Energy Storage

Thermoeconomic Analysis and Multiple Parameter Optimization of a Combined Heat and Power Plant Based on Molten Salt Heat Storage

Thermodynamic analyses and optimization of a novel CCHP system integrated organic Rankine cycle and solar thermal utilization

Thermodynamic and Exergoeconomic Analysis of a Supercritical CO2 Cycle Integrated with a LiBr-H2O Absorption Heat Pump for Combined Heat and Power Generation

Performance evaluation and operation optimization of a combined heat and power plant integrated with molten salt heat storage system

Preliminary Conceptual Design and Thermo-Economic Analysis of a Combined Cooling, Heating and Power System Based on Supercritical Carbon Dioxide Cycle

Thermodynamic Analysis and Optimization of a Novel Organic Rankine Cycle-Based Micro-Scale Cogeneration System Using Biomass Fuel

Finite-time thermodynamic and economic analysis of Rankine Carnot battery based on life-cycle method

Thermodynamic Optimization on Supercritical Carbon Dioxide Brayton Cycles to Achieve Combined Heat and Power Generation

Thermo-economic optimization of biomass-fired organic Rankine cycles combined heat and power system coupled CO2 capture with a rated power of 30 kW

Thermodynamic analysis of a novel combined heating and power system based on low temperature solid oxide fuel cell (LT-SOFC) and high temperature proton exchange membrane fuel cell (HT-PEMFC)

Thermo-economic analysis of a novel partial cascade organic-steam Rankine cycle

Exergy, exergoeconomic, and exergoenvironmental analyses of novel solar- and biomass-driven trigeneration system integrated with organic Rankine cycle

Comprehensive Analysis and Optimization for a Novel Combined Heating and Power System Based on Self-Condensing Transcritical CO2 Rankine Cycle Driven by Geothermal Energy from Thermodynamic, Exergoeconomic and Exergoenvironmental Aspects

Preliminary Conceptual Design and Performance Assessment of Combined Heat and Power Systems Based on the Supercritical Carbon Dioxide Power Plant

Thermodynamic Performance Analysis and Comparison of a Combined Cooling Heating and Power System Integrated with Two Types of Thermal Energy Storage

Thermodynamic Analysis of a Cogeneration System Combined with Heat, Cold, and Electricity Based on the Supercritical CO2 Power Cycle

Solar-Powered Combined Cooling, Heating, and Power Energy System with Phase-Change Material and Water Electrolysis: Thermo-Economic Assessment and Optimization

Thermodynamic analysis and optimization of the combined supercritical carbon dioxide Brayton cycle and organic Rankine cycle‐based nuclear hydrogen production system

Thermodynamic and Economic Analysis of a Gas-Turbine Combined Heat and Power Plant Considering Operational Flexibility