Abstract:ABSTRACTHexavalent chromium (Cr(VI)) has attracted great considerations due to their high toxicity, teratogenicity, and carcinogenicity. In this study, four Zr‐MOFs were synthesized and used to comparative study their catalytic performances of oxalic acid (OA) for Cr(VI) removal. Results showed that the removal efficiency for Cr(VI) was reached 65.91%, 78.64%, 53.58%, and 96.32% by MOF‐525, MOF‐525(Co), MOF‐525(Zn), and MOF‐525(Fe) in the presence of OA when the initial Cr(VI) concentration was 100 mg·L−1, respectively. The single‐factor experiments for further improving the Cr(VI) removal by MOF‐525(Fe)/OA demonstrated that the optimal conditions were OA dosage of 790 mg·L−1, and MOF‐525(Fe) dosage of 500 mg·L−1 and pH of 2.0, and the MOF‐525(Fe)/OA system could be used to treat Cr(VI)‐containing wastewater at concentrations below 50 mg·L−1. Ionic strength studies indicated that Na+, K+, Mg2+, Cl−, and SO42− had little effect on the catalytic reduction of Cr(VI), while high concentrations of Ca2+ (0.10 and 0.25 mol·L−1), NO3− (0.25 mol·L−1), and PO43− (0.25 mol·L−1) had significant inhibition effects. The reusability experiments showed that the stability of MOF‐525(Fe) was excellent, and it could be used for potential applications. Based on the results of Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), and Electron Paramagnetic Resonance spectrometer (EPR), the possible reduction mechanism of Cr(VI) by MOF‐525(Fe)/OA system was proposed as follows: The complexation of OA with Fe3+ was first complexed to produce Fe2+ and CO2•−, then Cr(VI) was combined with Zr–O and Fe–O clusters in MOF‐525(Fe) to obtain activation energy, and the reduction ability was enhanced at the same time; finally, Cr(VI) obtained electrons from CO2•− and was sequentially reduced as Cr(V) and Cr(III).

MOF-525 and Fe-loaded MOF-525 for the Selective Adsorption Removal of Cu(Ⅱ) and Cr(VI)

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Nanocasted synthesis of ordered mesoporous cerium iron mixed oxide and its excellent performances for As(V) and Cr(VI) removal from aqueous solutions.

An Exploratory Study on Low-Concentration Hexavalent Chromium Adsorption by Fe(III)-cross-linked Chitosan Beads

Adsorption Performances for Aqueous Cu(II) onto Chelating Resin Dowex M-4195: Interaction Mechanism Investigation

CTAB-surface-functionalized magnetic MOF@MOF composite adsorbent for Cr(VI) efficient removal from aqueous solution

Reduction Removal of Cr(VI) Using Oxalic Acid with MOF‐525(Fe) As Catalyst: Performance and Mechanism

One-pot solvothermal synthesis of Zr-based MOFs with enhanced adsorption capacity for Cu2+ ions removal

The One-Step Synthesis of a Novel Metal-Organic Frameworks for Efficient and Selective Removal of Cr(VI) and Pb(II) from Wastewater: Kinetics, Thermodynamics and Adsorption Mechanisms.

Efficient adsorptive removal of two anionic dyes (methyl orange and methyl red) with MOF‐525: Adsorption isotherms and kinetics studies

Adsorption performance and physicochemical mechanism of MnO2-polyethylenimine-tannic acid composites for the removal of Cu(II) and Cr(VI) from aqueous solution

Highly efficient nano-Fe/Cu bimetal-loaded mesoporous silica Fe/Cu-MCM-41 for the removal of Cr(VI): Kinetics, mechanism and performance

Selective Adsorption Behavior of Cu(II) and Cr(VI) Heavy Metal Ions by Functionalized Ordered Mesoporous Carbon

Selective Adsorption of Congo Red and Cu(II) from Complex Wastewater by Core-Shell Structured Magnetic Carbon@zeolitic Imidazolate Frameworks-8 Nanocomposites

Study on Adsorption of Cu2+ and Cr(Ⅵ) from Aqueous Solutions by "MgO/AC" Composites

Adsorption and reduction of Cr(VI) in water by iron-based metal-organic frameworks (Fe-MOFs) composite electrospun nanofibrous membranes

Convenient Synthesis of Co-base Metal-Organic Frameworks to Effectively Adsorb and Remove Cr(VI) from Aqueous

MXene@MOF for Synergetic Removal of Cr(VI) by Adsorption and Reduction

Enhancement of Adsorption Performance for I2 and Cr(VI) by the Metal-Organic Framework UiO-66-NH2 Via Post-Synthetic Modification

Efficient Cr(VI) remediation by electrospun composite porous nanofibers incorporating biomass with metal oxides and metal-organic framework

Adsorption behavior of heavy metal ions on a polymer-immobilized amphoteric biosorbent: Surface interaction assessment