Abstract:The critical zone sustains terrestrial life, but we have few tools to explore it efficiently beyond the first few meters of the subsurface. Using analyses of high‐frequency ambient seismic noise from densely spaced seismometers deployed in the forested Shale Hills subcatchment of the Susquehanna Shale Hills Critical Zone Observatory (SSHCZO), we show that temporal changes in seismic velocities at depths from ∼1 m to tens of m can be detected. These changes are driven by variations at the land surface. The Moving‐Window Cross‐Spectral (MWCS) method was employed to measure seismic‐velocity changes in coda waves at hourly resolution in 10 different frequency bands. We observed a diurnal signal, a seasonal signal, and a meteorological‐event‐based signal. These signals were compared to time‐series measurements of precipitation, well water levels, soil moisture, soil temperature, air temperature, latent heat flux, and air pressure in the heavily instrumented catchment. Most of the velocity changes can be explained by variations in temperature that result in thermoelastic strains that propagate to depth. But some double minima in seismic velocity time‐series observed after large rain events were attributed in part to the effects of water infiltration. These results show that high‐frequency ambient noise data may in some locations be used to detect changes in the critical zone from ∼1 to ∼100 m or greater depth with hourly resolution. But interpretation of such data requires multiple environmental data sets to deconvolve the complex interrelationships among thermoelastic and hydrological effects in the subsurface critical zone. Measuring changes in Earth's subsurface over time is necessary to understand processes such as groundwater flow and soil formation that are important to human life, but unlike at the Earth's surface, these underground changes are difficult to observe directly. In this study, we analyzed vibrations in the ground driven by ambient noise at the land surface. By measuring small changes in the velocity of seismic waves moving through the earth, we detected changes occurring in the upper ∼100 m over several months. We observed seismic‐velocity changes related to daily and longer‐term seasonal weather variations. We were able to interpret the data because we compared our results to a multitude of environmental measurements at the same location. We attribute most of the changes in seismic velocity to changes in temperature at the surface that in turn create small stresses in the earth that propagate downward. We also observed velocity changes after rainstorms that are likely caused by the infiltration of water into the ground. We use high‐frequency ambient seismic noise to detect changes in seismic velocity in the critical zone at the Shale Hills catchment We observe diurnal, meteorological‐event‐based, and seasonal changes in velocity We interpret velocity changes to be primarily driven by temperature changes at the surface, while water movement plays a secondary role We use high‐frequency ambient seismic noise to detect changes in seismic velocity in the critical zone at the Shale Hills catchment We observe diurnal, meteorological‐event‐based, and seasonal changes in velocity We interpret velocity changes to be primarily driven by temperature changes at the surface, while water movement plays a secondary role

Monitoring Water Level of a Surficial Aquifer Using Distributed Acoustic Sensing and Ballistic Surface Waves

Tracking surficial aquifer state using DAS and ballistic Rayleigh waves

Integrated Amphibious Distributed Acoustic Sensing for Seismic Monitoring in the Xinfengjiang Reservoir

Space-time monitoring of groundwater fluctuations with passive seismic interferometry

Monitoring ground water storage at mesoscale using seismic noise: 30 years of continuous observation and thermo-elastic and hydrological modeling

Investigation and Use of Surface-wave Characteristics for Near-surface Applications

Monitoring of water volume in a porous reservoir using seismic data: Validation of a numerical model with a field experiment

Seismic Ambient Noise Analyses Reveal Changing Temperature and Water Signals to 10s of Meters Depth in the Critical Zone

Monitoring Terrestrial Water Storage, Drought and Seasonal Changes in Central Oklahoma With Ambient Seismic Noise

High-Frequency Rayleigh Wave And Its Applications In Near-Surface Geophysics

Watching the Cryosphere Thaw: Seismic Monitoring of Permafrost Degradation Using Distributed Acoustic Sensing During a Controlled Heating Experiment

Investigating Well Water Level Oscillations Caused by Seismic Waves Using Automatically Detected Responses

High‐Resolution Near‐Surface Imaging at the Basin Scale Using Dark Fiber and Distributed Acoustic Sensing: Toward Site Effect Estimation in Urban Environments

High Resolution Monitoring of Seawater Intrusion in a Multi-Aquifer System-Implementation of a New Downhole Geophysical Tool

Revealing the shallow soil structure of the Yigong Lake in the Tibetan Plateau using a portable distributed acoustic sensing interrogator

Near-surface characterization using shear-wave resonances: A case study from offshore Svalbard, Norway

Estimating Near-Surface Shear-Wave-Velocity Structures Via Multichannel Analysis of Rayleigh and Love Waves: An Experiment at the Boise Hydrogeophysical Research Site

Comparison of surface-wave techniques to estimate S- and P-wave velocity models from active seismic data

Continuous seismic monitoring of hydraulic fracturing reveals complex subsurface dynamics: observations using distributed acoustic sensing and surface orbital vibrators

New Developments In Analysis Of High-Frequency Rayleigh Waves

Space‐Time Monitoring of Seafloor Velocity Changes Using Seismic Ambient Noise