Abstract:The critical zone sustains terrestrial life, but we have few tools to explore it efficiently beyond the first few meters of the subsurface. Using analyses of high‐frequency ambient seismic noise from densely spaced seismometers deployed in the forested Shale Hills subcatchment of the Susquehanna Shale Hills Critical Zone Observatory (SSHCZO), we show that temporal changes in seismic velocities at depths from ∼1 m to tens of m can be detected. These changes are driven by variations at the land surface. The Moving‐Window Cross‐Spectral (MWCS) method was employed to measure seismic‐velocity changes in coda waves at hourly resolution in 10 different frequency bands. We observed a diurnal signal, a seasonal signal, and a meteorological‐event‐based signal. These signals were compared to time‐series measurements of precipitation, well water levels, soil moisture, soil temperature, air temperature, latent heat flux, and air pressure in the heavily instrumented catchment. Most of the velocity changes can be explained by variations in temperature that result in thermoelastic strains that propagate to depth. But some double minima in seismic velocity time‐series observed after large rain events were attributed in part to the effects of water infiltration. These results show that high‐frequency ambient noise data may in some locations be used to detect changes in the critical zone from ∼1 to ∼100 m or greater depth with hourly resolution. But interpretation of such data requires multiple environmental data sets to deconvolve the complex interrelationships among thermoelastic and hydrological effects in the subsurface critical zone. Measuring changes in Earth's subsurface over time is necessary to understand processes such as groundwater flow and soil formation that are important to human life, but unlike at the Earth's surface, these underground changes are difficult to observe directly. In this study, we analyzed vibrations in the ground driven by ambient noise at the land surface. By measuring small changes in the velocity of seismic waves moving through the earth, we detected changes occurring in the upper ∼100 m over several months. We observed seismic‐velocity changes related to daily and longer‐term seasonal weather variations. We were able to interpret the data because we compared our results to a multitude of environmental measurements at the same location. We attribute most of the changes in seismic velocity to changes in temperature at the surface that in turn create small stresses in the earth that propagate downward. We also observed velocity changes after rainstorms that are likely caused by the infiltration of water into the ground. We use high‐frequency ambient seismic noise to detect changes in seismic velocity in the critical zone at the Shale Hills catchment We observe diurnal, meteorological‐event‐based, and seasonal changes in velocity We interpret velocity changes to be primarily driven by temperature changes at the surface, while water movement plays a secondary role We use high‐frequency ambient seismic noise to detect changes in seismic velocity in the critical zone at the Shale Hills catchment We observe diurnal, meteorological‐event‐based, and seasonal changes in velocity We interpret velocity changes to be primarily driven by temperature changes at the surface, while water movement plays a secondary role

Space‐Time Monitoring of Seafloor Velocity Changes Using Seismic Ambient Noise

Shallow Shear-Wave Velocity Structure Beneath the West Lake Area in Hangzhou, China, from Ambient-Noise Tomography

Shear Wave Velocity Inversion Based on Scholte Waves for a Fully Saturated Seabed

Study Of Extracting Group Velocities Of Near-Surface Rayleigh Waves From Ambient Noise

Ambient Noise Tomography of Three-Dimensional Near-Surface Shear-Wave Velocity Structure Around the Hydraulic Fracturing Site Using Surface Microseismic Monitoring Array

Imaging the shallow velocity structure of the slow‐spreading ridge of the South China Sea with downward continued multichannel seismic data

Time-lapse imaging using 3D ultra-high-frequency marine seismic reflection data

Continuous subsurface velocity measurement with coda wave interferometry

High temporal resolution monitoring of small variations in crustal strain by dense seismic arrays

Non-Repetitive Time-Shifted Seismic Monitoring Study Based on Ocean Bottom Cable and Towed Streamer Data

Fine-scale velocity distribution revealed by datuming of very-high-resolution deep-towed seismic data: Example of a shallow-gas system from the western Black Sea

Monitoring ground water storage at mesoscale using seismic noise: 30 years of continuous observation and thermo-elastic and hydrological modeling

Monitoring Water Level of a Surficial Aquifer Using Distributed Acoustic Sensing and Ballistic Surface Waves

A feasibility study on monitoring crustal structure variations by direct comparison of surface wave dispersion curves from ambient seismic noise

Downhole distributed acoustic sensing provides insights into the structure of short‐period ocean‐generated seismic wavefield

Seismic Ambient Noise Analyses Reveal Changing Temperature and Water Signals to 10s of Meters Depth in the Critical Zone

Evaluation of MASW Data Acquired with a Hydrophone Streamer in a Shallow Marine Environment

Seismic imaging of S-wave structures of shallow sediments in the East China Sea using OBN multicomponent Scholte-wave data

Shear‐wave velocity structure derived from seismic ambient noise recorded by a small reservoir monitoring network

Monitoring Terrestrial Water Storage, Drought and Seasonal Changes in Central Oklahoma With Ambient Seismic Noise

High-Resolution Ambient Noise Imaging of Geothermal Reservoir Using 3C Dense Seismic Nodal Array and Ultra-Short Observation