Abstract:ZnxOy conformal nano‐sized protective layer for stabilaizing nickel‐rich, low‐cobalt layered oxide cathode materials, and improving their electrochemical performance at high discharge rates of 2 C by suppression of parasitic reactions and better maintenance of electrochemically available Li‐ion inventory Nickel‐rich cathode materials such as LiNi0.9Co0.05Mn0.05O2 (NMC90) have gained attention due to their ability to deliver high energy densities while being cost‐effective for Lithium‐ion battery manufacturing. However, NMC90 cathodes suffer irreversible parasitic reactions such as electrolyte decomposition, severe capacity fading and impedance build‐up upon prolonged cycling. Herein, we synthesize a conformal ultrathin, surface protection layer on NMC90 powder using ZnxOy via atomic layer deposition technique (ZnxOy@NMC90). Prolonged electrochemical investigation of full cells at high discharge rates of 2 C shows that ZnxOy@NMC90 cells yielded ~31 % improvement in discharge capacity compared to pristine NMC90. Furthermore, operando electrochemical mass spectroscopy studies show that the ZnxOy@NMC90 cells have significantly suppressed electrolyte decomposition as compared to pristine NMC90 cells. Post‐cycling electrochemical impedance spectroscopy studies show that the ZnxOy@NMC90 full cells have significantly reduced impedance compared with pristine NMC90 cells. Additionally, post cycling manganese dissolution studies show that ZnxOy@NMC90 cells have greatly enhanced chemo‐mechanical integrity thereby contributing to improved electrochemical performances. Our results underscore the potential of tailored ZnxOy surface coatings on nickel‐rich cathode materials to address critical challenges in advanced energy storage systems, offering promising prospects for the development of high‐energy‐density lithium‐ion batteries.

Ultra‑low‑dose Nb2O5 Coating Promotes Electrochemical Kinetics and Rate Capability of Ni-rich Oxide Cathode

Surface Coating of NCM-811 Cathode Materials with G-C3n4 for Enhanced Electrochemical Performance.

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Optimized structure stability and cycling performance of LiNi0.8Co0.1Mn0.1O2 through homogeneous nano-thickness Al2O3 coating

A Low-Temperature Coating Method with H3BO3 for Enhanced Electrochemical Performance of Ni-rich LiNi0.82Co0.12Mn0.06O2 Cathode

Enhanced electrochemical performance of cobalt oxide layers coated LiNi0.8Co0.1Mn0.1O2 by polyvinylpyrrolidone-assisted method cathode for Li-ion batteries

Polyvinylpyrrolidone-Induced Uniform Surface-Conductive Polymer Coating Endows Ni-Rich LiNi0.8Co0.1Mn0.1O2 with Enhanced Cyclability for Lithium-Ion Batteries.

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

Sol/Antisolvent Coating for High Initial Coulombic Efficiency and Ultra-stable Mechanical Integrity of Ni-Rich Cathode Materials

Two-step carbon coating onto nickel-rich LiNi0.8Co0.1Mn0.1O2 cathode reduces adverse phase transition and enhances electrochemical performance

High-performance LiNi0.8Mn0.1Co0.1O2 cathode by nanoscale lithium sulfide coating via atomic layer deposition

Li2sio3 Coating to Improve the High-Voltage Performance of Lini1/3co1/3mn1/3o2 Cathode

Boosting the performance of LiNi0.90Co0.06Mn0.04O2 electrode by uniform Li3PO4 coating via atomic layer deposition

Stabilization of NCM811 cathode for Li-ion batteries by N-doped carbon coating

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

What is the Role of Nb in Nickel-Rich Layered Oxide Cathodes for Lithium-Ion Batteries?

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Enhanced electrochemical performance of Ni-rich cathode material by N-doped LiAlO2 surface modification for lithium-ion batteries

Effect of Zr–Y Double Doping and Al2O3 Coating on Properties of Nickel-Rich Monomer LiNi0.6Co0.2Mn0.2O2 Cathode Material for Li-Ion Batteries

Nanoscale operation of Ni-Rich cathode surface by polycrystalline solid electrolytes Li3.2Zr0.4Si0.6O3.6 coating

Improving the Performance of LiNi0.9Co0.05Mn0.05O2 via Atomic Layer Deposition of ZnxOy Coating