Abstract:The PEDOT:PSS is deposited on the Me‐4PACz to form a composite hole‐transport interface layer. There is a built‐in potential inside the composite interlayer due to the change in work function, which is beneficial for hole collection and results in low nonradiative recombination rate. As a result, the high power conversion efficiency of 18.70% is achieved for binary all‐polymer solar cells. Trap states in organic solar cells (OSCs) can capture free charges, leading to a reduction in current density and significant energy loss. Since charge collection is primarily dependent on the interface layer, minimizing trap states at interfaces can effectively suppress energy losses, a topic that has been rarely explored. Herein, an interface strategy is proposed by combining Me‐4PACz and PEDOT:PSS to mitigate the trap‐assisted nonradiative recombination at the hole transport layer (HTL). OSCs based on the Me‐4PACz/PEDOT:PSS exhibit reduced trap densities and low energy losses compared to devices fabricated with a single‐layer HTL. This reduction can be attributed to a lower nonradiative recombination rate during hole transport at the interface. Changes in the work function of the two interlayers due to contact result in the existence of a built‐in potential inside the composite interlayer, promoting charge collection and reducing energy loss from charge recombination. Furthermore, the composite HTL interface induces vertical phase separation of active layer, leading to significant improvements of the fill factor for OSCs. As a result, high power conversion efficiencies (PCEs) of 18.70% and 19.02% are achieved for binary all‐polymer solar cells and polymer donor/small molecule acceptor solar cells, respectively.

Improving the Operating Performance of Organic Solar Cells Through a Novel Cathode Interface Layer

Glycolic Acid Doped PFN-Br As Cathode Interface to Achieve High-Efficiency in Organic Solar Cells

Simple Solvent Treatment Enabled Improved PEDOT:PSS Performance Toward Highly Efficient Binary Organic Solar Cells

Interfacial Modification in Organic and Perovskite Solar Cells.

An Inorganic Molecule-Induced Electron Transfer Complex for Highly Efficient Organic Solar Cells

Suppressing Trap‐Assisted Nonradiative Recombination via Interface Modification for Achieving Efficient Organic Solar Cells

High performance organic solar cells prepared with bi‐triangular pyramidal organic phosphonium interface material

Optimizing of Cathode Interface Layers in Organic Solar Cells Using Polyphenols: An Effective Approach

Employing Inorganic/Organic Hybrid Interface Layer to Improve Electron Transfer for Inverted Polymer Solar Cells

Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar Cells

Boosted Electron Transport and Enlarged Built-In Potential by Eliminating the Interface Barrier in Organic Solar Cells.

Boosting the Efficiency of Non-fullerene Organic Solar Cells via a Simple Cathode Modification Method

New self-doping alcohol-soluble polymer PDBND-FN as cathode interface layer enables efficient organic solar cells

Multiple Electron Transporting Layers and Their Excellent Properties Based on Organic Solar Cell

High performance ZnO cathode interface doped by organic electrolyte and inorganic metal ion for organic solar cells

Enhanced performance of perovskite solar cells with multifunctional organic interface conditioner

Enhanced efficiency of organic solar cells through trans-cinnamic acid doped cathode interface layer

Improving the Performance of Layer-by-Layer Organic Solar Cells by n-Doping of the Acceptor Layer

Modifying Organic/metal Interface Via Solvent Treatment to Improve Electron Injection in Organic Light Emitting Diodes

Cathode engineering with perylene-diimide interlayer enabling over 17% efficiency single-junction organic solar cells

Interface Modification for Organic and Perovskite Solar Cells