Abstract:Alkaline water electrolysis (AWE) has the highest technological maturity among all the water electrolysis technologies for hydrogen production, however, reducing the minimum load boundary and improving the electrolysis efficiency are the technical challenges of the AWE system that still exist and urgently require optimization. The minimum load is primarily limited by the hydrogen to oxygen (HTO) from cross-diaphragm transfer and lye mixing, with HTO above 2.0% being a significant safety risk. Reducing the lye flow rate and pressure are effective while two of the few ways by regulating the operating parameters to improve the HTO thus extend the minimum load boundary, but will worsen electrolysis efficiency. Therefore, this study proposes a synergistic regulation strategy of pressure and lye flow rate: maximizing pressure and lye flow rate during high load period to ensure high electrolysis efficiency; adjusting lye flow rate and pressure during medium load period to ensure HTO≤2.0% and maximize the electrolysis efficiency; and reducing lye flow rate and pressure to a low level during the low load period to broaden the minimum load so as to improve overall efficiency of AWE system when loading with fluctuant green electric. This work elaborates the HTO routes, influencing factors and parameter optimization mechanism by building a system-level steady-state and dynamic gas purity model. The optimal combination curve of pressure and lye flow rate is obtained and its control effect on performance parameters, in terms of minimum load, system energy consumption, energy utilization, electrolysis efficiency and so on, is compared and verified in high dynamic wind and photovoltaic (PV) power scenarios. Finally, the optimal wind & PV power ratios are explored based on the optimal operation curve, which will provide a reference for the future large-scale development of hydrogen production scenarios direct-coupled with wind and PV power. The minimum load is extended from 42.0% in the lye flow rate alone control to 21.2% in the pressure alone control and finally to 15.6% in the lye flow rate and pressure synergistic control method. In the absence of electrical replenishment, wind and PV energy utilization efficiency can reach up to 98.3% and 95.6%, respectively.

Effect of Electrolyte Circulation on Hydrogen-in-oxygen in Alkaline Water Electrolysis

Research on oxygen purity based on industrial scale alkaline water electrolysis system with 50Nm 3 H 2 /h

Research on Oxygen Purity Based on Industrial Scale Alkaline Water Electrolysis System with 50nm3 H2/h

Investigation of the hydrogen bubble effect on the overpotential in an alkaline water electrolyzer

In-situ Investigation and Modeling of Electrochemical Reactions with Simultaneous Oxygen and Hydrogen Microbubble Evolutions in Water Electrolysis

Numerical modeling and analysis of the effect of pressure on the performance of an alkaline water electrolysis system

Study on the Synergistic Regulation Strategy of Load Range and Electrolysis Efficiency of 250 Kw Alkaline Electrolysis System under High-Dynamic Operation Conditions

Insights into the pH effect on hydrogen electrocatalysis

Experimental Studies on Dynamic Performance of 250kw Alkaline Electrolytic System

Role of electron pathway in dimensionally increasing water splitting reaction sites in liquid electrolytes

The Optimization of a Physical Factor of Hydrogen Production in Alkaline Water Electrolysis

Numerical modeling of dry cell alkaline electrolyzer for HHO production

Concerns on the Effects of Electrode Positions in Electrolyte Container for the Oxygen Evolution Reaction

Study the Effect of Lye Flow Rate, Temperature, System Pressure and Different Current Density on Energy Consumption in Catalyst Test and 500W Commercial Alkaline Water Electrolysis

Numerical Simulation and Analysis of a Two-Phase Flow Model Considering Bubble Coverage for Alkaline Electrolytic Water

Active Pressure and Flow Rate Control of Alkaline Water Electrolyzer Based on Wind Power Prediction and 100% Energy Utilization in Off-Grid Wind-Hydrogen Coupling System

Optimum pulse electrolysis for efficiency enhancement of hydrogen production by alkaline water electrolyzers

Boosting alkaline water electrolysis by asymmetric temperature modulation

Effect of Operating Parameters on Performance of Alkaline Water Electrolysis

Energy consumption model of flow-through electrolyzer considering mass transfer overpotential for hydrogen production from alkaline water splitting

Mechanism analyses and optimization strategies for performance improvement in low-temperature water electrolysis systems via the perspective of mass transfer: A review