Abstract:This paper proposes a numerical method for the strand breakage defect in large cross-section conductors during tension stringing construction. First, the contact types between strands in the same layer and adjacent layers of the conductor were analyzed. The relationship between the force and depth of strand contact was then determined. The structural calculation method for straight conductor under tensile and torsional loads was proposed considering in the contact between strands, which can obtain the accurate calculation results of strands in different layers. The method avoids the establishment of complex multi-strand models and the setup of large number contact pairs, and has a much higher computational efficiency than finite element method (FEM), the performance gap is up to 300 times. For 630 mm 2 conductor, the calculated results of strands demonstrated significant changes in the axial forces of strands of different layers under positive and negative torque, which substantially influences the strand breakage patterns. Through the analysis of the mechanical cause of strand breakage, a calculation formula for the axial force of strands were proposed based on the deformation process as the conductor passes through the stringing block. The results of 630 mm 2 conductor indicated that the torque and tension on the conductor are critical factors of the strand breakage. Referencing the actual engineering conditions, a test setup was designed to simulate the conductor passing through the block, and the breakage defect of strand was reproduced. The forms and locations of the breakage defects observed in the tests were consistent with the calculated results, validating the alignment of the theoretical analysis with actual states. This proposed method can be applied to analyze the strand defect of conductor with various cross-sections, which offers a theoretical foundation for the prevention and control of construction defect in the transmission line.

A New Theory for Calculating the Torsional Stiffness of Multi-Bundled Conductors

Static model and cross section characteristic analysis of steel strand

Influence of torsion stiffness of spatial truss string system on structural stability

Inverse analysis method for calculating cable tension based on controlling the initial length of cables

Torsional Stiffness and Galloping Mechanism Analysis on Bundle Conductors for Overhead Transmission Lines

Design of Thin-Walled Centrifugal Concrete-Filled Steel Tubes under Torsion

Theoretical study on the nonlinear performance of single-box multi-cell composite box-girder with corrugated steel webs under pure torsion

Study on the working mechanism and behavior of centrifuge concrete filled-steel tubular(CCFT) members subjected to torsion

Experimental study on centrifuge concrete filled thin-walled steel tubular components under the action of torsion

Finite Element Solutions to the Bending Stiffness of a Single-Layered Helically Wound Cable With Internal Friction

A method for sag calculation of conductor with large section based on super long thin elastic rod model

Calculation method and experimental research on strand breakage in large cross-section conductors considering contact between strands

Experimental study on Tapered Concrete-Filled Double Skin Steel Tubular columns under torsion

Comparison of theoretical elastic couple stress predictions with physical experiments for pure torsion

Torsional Properties of Bundles with Randomly Packed Carbon Nanotubes

A Hierarchical Theory for the Tensile Stiffness of Non-Buckling Fractal-Inspired Interconnects

Three-dimensional vibrations of a helically wound cable modeled as a Timoshenko rod

CROSS SECTIONAL SHEAR STRAIN DISTRIBUTION OF RECTANGULAR CONCRETE FILLED STEEL TUBE COLUMNS SUBJECTED TO TORSION

Mechanical analysis of finned special-shaped tubes in bending-torsional coupling deformation

Free Vibration Analysis of Transmission Lines Based on the Dynamic Stiffness Method.

Magnetoelastic Bending and Buckling of Three-Coil Superconducting Partial Torus