Abstract:Wearable electronics are one of the most rapidly growing industries, due to their extended use in everyday applications resulting in an increased demand for portable energy storage devices. Despite immense success in commercialization of Lithium-ion batteries (LIBs), conventional LIBs suffer from issues of cost and safety. The expanding need for cheaper, and safer energy storage devices led explorations towards alternatives. After careful considerations, Zinc (Zn)-Manganese dioxide (MnO 2 ) based alkaline system was chosen to be investigated in this work due to its low cost, inherent safety, and high theoretical energy density. However, challenges associated with making the aforementioned system rechargeable and highly performing still remains. The work in this study is directed towards enhancing the overall performance of the Zn-MnO 2 alkaline battery in addition to making it suitable for flexible and wearable applications. A highly ionically conducting polymer electrolyte ({5}CP) with excellent physical and electrochemical stability primarily comprising biopolymer chitosan is prepared by using a time and energy-efficient technique. Incorporation of this polymer electrolyte with Zn anode and MnO 2 cathode enabled the successful preparation of a physically flexible cell. To obtain high cyclability and performance of the system; issues of inactive phase formations (Mn x O y , ZnMn x O y ), low active material availability, pronounced shape changes at the anode surface, and zincate ion transfer towards cathode were overcome by enhancing the electrochemically active layers in the system. The assembled cell comprising the enhanced fabricated layers; (i.e. a Zinc/Stainless steel mesh composite anode, a hierarchical binder-free bismuth and copper additives based MnO 2 cathode, and a chitosan-based polymer electrolyte with calcium hydroxide additive) indicated excellent rate capabilities (486 mAh/g @ 0.1 A/g, 78% of the theoretical 2-electron capacity on MnO 2 ), long cycling stabilities (70% retention over 1000 cycles), and good energy densities (155 – 400 Wh/kg @ 0.1 – 1 A/g). Moreover, a number of destructive tests such as being bent, hammered, pressurized, and punctured were conducted on the pouch cell fabricated using the above-mentioned layers to analyze the cells' safety, reliability, and robustness. Results indicated not much deterioration in capacities. Additionally, when the cell was bent and tested for long performance; a stable discharge capacity (270 mAh/g @ 1 A/g) was obtained after 250 cycles, thus attesting to excellent cycling stability. The successful working of the fabricated cell was validated by lighting up an LED. The successful findings presented in this study can chart new pathways to the development of safe, flexible, cost-effective, and more environmentally responsible alternative energy storage sources for wearables.

Flexible Fiber-Shape Zn-MnO2 Battery for Wearable Electronic Devices

(Invited) Flexible and Safe Zinc Alkaline Solid-State Rechargeable Battery for Wearable Applications

Flexible and Safe Additives-Based Zinc-Binder-Free-Hierarchical MnO2 -Solid Alkaline Polymer Battery for Potential Wearable Applications.

Nanomaterial-Enhanced All-Solid Flexible Zinc-Carbon Batteries

An extremely safe and wearable solid-state zinc ion battery based on a hierarchical structured polymer electrolyte

Ultra-Durable and Flexible Fibrous Mild Quasi-Solid-State Ag-Zn Battery with Na2SO4 Electrolyte Additive

Flexible Zinc–Air Batteries with Ampere‐Hour Capacities and Wide‐Temperature Adaptabilities

Finely Crafted 3D Electrodes for Dendrite-Free and High-Performance Flexible Fiber-Shaped Zn-Co Batteries

A Quasi-Solid-State Flexible Fiber-Shaped Li-CO2 Battery with Low Overpotential and High Energy Efficiency.

Constructing Carbon Nanotube Hybrid Fiber Electrodes with Unique Hierarchical Microcrack Structure for High‐Voltage, Ultrahigh‐Rate, and Ultralong‐Life Flexible Aqueous Zinc Batteries

A One-Dimensional Channel Self-Standing MOF Cathode for Ultrahigh-Energy-density Flexible Ni–Zn Batteries

Amorphous H0.82MoO3.26 cathodes based long cyclelife fiber-shaped Zn-ion battery for wearable sensors

In Situ Encapsulating Metal Oxides into Core-Shell Hierarchical Hybrid Fibers for Flexible Zinc-Ion Batteries toward High Durability and Ultrafast Capability for Wearable Applications

Flexible Quasi-Solid-state Zinc Ion Batteries Enabled by Highly Conductive Carrageenan Bio-Polymer Electrolyte

High-Performance flexible Quasi-Solid-State aqueous Nickel-Iron battery enabled by MOF-Derived N -Doped carbon hollow nanowall arrays

A braided flexible Zn–MnO 2 yarn battery based on cobweb-like carbonized polypyrrole modified carbon fiber electrodes

A Highly Flexible and Lightweight MnO2/Graphene Membrane for Superior Zinc‐Ion Batteries

High‐Fluidity/High‐Strength Dual‐Layer Gel Electrolytes Enable Ultra‐flexible and Dendrite‐Free Fiber‐Shaped Aqueous Zinc Metal Battery

In situ crafting of a 3D N-doped carbon/defect-rich V2O5- x· n H2O nanosheet composite for high performance fibrous flexible Zn-ion batteries

Flexible and Antifreezing Fiber-Shaped Solid-State Zinc-Ion Batteries with an Integrated Bonding Structure

All‐Metal‐Organic Framework‐Derived Battery Materials on Carbon Nanotube Fibers for Wearable Energy‐Storage Device