Abstract:Converting industrial wastes into value-added building products in an environmental management strategy is a challenging yet vital component of the industrial process. Steel slag (SS), an industrial waste by-product from the steel-making process, is typically disposed of in landfill which consumes land resources and pollutes the environment. This paper explores the possibility of a closed-loop system to convert steel slag into a cement material through carbonation activation, thereby significantly reducing the amount of steel slag waste sent to landfills across Canada. The production of this cementing material can occur next to the steel mill, utilizing steel slag and carbon dioxide collected on-site to fabricate carbon-negative products. To save energy and allow production to be feasible on an industrial scale, ambient pressure (AP) carbonation is developed to reduce carbon emissions while improving their performance. High pressure (HP) carbonation curing and normal hydration (NH) references were also implemented at the same time to justify the application of AP carbonation in reducing CO2 emission. The results of this study found AP carbonation-activated SS compacts have comparable CO2 uptake (about 7.5 tons CO2/100 tons slag) and mechanically compressive strength values as those subjected to HP carbonation, suggesting that AP could be used to replace HP in carbonation curing to ensure a lower energy input. Additionally, AP seemed to possess as effective carbonation as HP. The studies investigated by multiple techniques including X-ray diffractometer (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopic analysis, and scanning electron microscopy (SEM) aim to identify the microstructure development of carbonated SS paste to assess carbonation results. Developed with life cycle assessment (LCA), environmental impact evaluation shows that AP presents a smaller global warming potential (GWP) value than HP. The comparable CO2 sequestration, satisfactory engineering properties, enhanced microstructure and lesser environmental impact in AP carbonation confirm the feasibility of replacing high pressure with extremely low pressure to cure concrete products. The use of AP carbonation for cement material created using steel slag reduces carbon emissions, energy usage, and natural resource consumption.

Preparation of High Strength Carbon Negative Building Material by CO2 Curing Biochar- EAF Steel Slag Compacts

Preparation of High Strength Carbon Negative Building Material by CO2 2 Curing Biochar- EAF Steel Slag Compacts

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Accelerated Carbonation of Biochar Reinforced Cement-Fly Ash Composites: Enhancing and Sequestering CO2 in Building Materials

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

Effect of Carbonation Treatment on the Strength and CO2 Uptake Rate of Composite Cementitious Material with a High Steel Slag Powder Content

Effects of internal CO 2 curing provided by biochar on the carbonation and properties of steel slag-based artificial lightweight aggregates (SALAs)

Interdependent factors contributing towards carbonation of steel slag compact: consideration of casting pressure, water dosage and carbonation duration

Effect of Carbonation Treatment on the Properties of Steel Slag Aggregate

Effect of CO2 treatment on the microstructure and properties of steel slag supplementary cementitous materials

Impacts of Hydration Degree of Steel Slag on Its Subsequent CO2 Capture Behaviors and Mechanical Performances of Prepared Building Materials

Development of high-volume steel slag as cementitious material by ethylenediamine tetraacetic acid induced accelerated carbonation

Production of cleaner high-strength cementing material using steel slag under elevated-temperature carbonation

Improvement in mechanical properties and microstructure of electric arc furnace slag bricks by microbial accelerated carbonation

Mechanical Activation of Medium Basicity Steel Slag under Dry Condition for Carbonation Curing

Steel Slag Accelerated Carbonation Curing for High-Carbonation Precast Concrete Development

Carbonation-enhanced Interfacial Transition Zone in Biochar-Cement Mortar

Utilization of accelerated carbonation to enhance the application of steel slag: a review

Analysis of Mechanical Performance and Microstructure of Steel Slag Processed with Accelerated Carbonation

Converting industrial waste into a value-added cement material through ambient pressure carbonation

Material Properties of Cement Doped with Carbonated Steel Slag Through the Slurry Carbonation Process: Effect and Quantitative Model