Abstract:In this study, the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy (HEA) were investigated by subjecting as-cast samples to cold rolling and annealing at different temperatures for 1 h. The as-cast and cold rolled HEAs show a single-phase face-centered cubic (FCC) structure. The annealing temperature has a noteworthy influence on the phase composition and microstructure of the cold rolled HEA, and the microstructural evolution is described as follows: heterogeneous microstructure with a FCC matrix and body-centered cubic (BCC) precipitates (750 ℃ and 850 ℃) → recrystallized microstructure with FCC matrix and BCC precipitates (950 ℃) → coarse grains with a single FCC phase (1050 ℃). Though the HEA annealed at 1050 ℃ has the best ductility and lowest coercivity, the yield strength is very low. A good combination of ductility and strength is found in the sample annealed at 850 ℃ (CR+HEA-850), whose microstructure is comprised of BCC precipitates, recrystallized FCC equiaxed grains and a few FCC hard-deformed lamellae. The heterogeneous structure of the CR+HEA-850 resulted in a strong back stress, which contributes to its good mechanical properties. The high yield strength came from the grain refinement, dislocation strengthening, Orowan effect, and twin boundaries. Additionally, its soft magnetic properties are also appealing, showing high saturated magnetization (112.4 emu/g) and good coercivity (8.7 Oe). Compared with the HEAs on other conditions in this study and those previously reported, the CR+HEA-850 displays an interesting combination of magnetic and mechanical performance, which offers a strategy towards a new generation of multifunctional high-entropy alloys.

Heterogeneous Microstructure and Mechanical Properties of Carbon-Doped FeCoCrNiMn High-Entropy Alloy

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Heterogeneous Structure Design to Strengthen Carbon-Containing CoCrFeNi High Entropy Alloy

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Improving Mechanical Properties of Co-Cr-Fe-Ni High Entropy Alloy via C and Mo Microalloying

Carbide Precipitation Strengthening in Fine-Grained Carbon-Doped FeCoCrNiMn High Entropy Alloy

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

In Situ Development and High Temperature Features of CoCrFeNi-M6Cp High Entropy-Alloy Based Hardmetal

Tunable Mechanical Property and Strain Hardening Behavior of a Single-Phase CoFeNi2V0.5Mo0.2 High Entropy Alloy

Strengthening the FeCoCrNiMo0.15 high entropy alloy by a gradient structure

Microstructure Evolution and Mechanical Property of Directionally Solidified CoCrFeMnNi High Entropy Alloy

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment

Heavy Carbon Alloyed FCC-structured High Entropy Alloy with Excellent Combination of Strength and Ductility

Microstructures and properties of Fe1.25CoNi1.25CrxAl0.25 high-entropy alloys after cold-rolling and annealing

Microstructural Origins for a Strong and Ductile Al0.1CoCrFeNi High-Entropy Alloy with Ultrafine Grains

Microstructure and mechanical properties of CrFeNi high-entropy alloy reinforced by Al and Ti elements

Significant enhancement in comprehensive mechanical properties of Cr-Fe-Ni-Al-Si-Ti-Cu high-entropy alloy in as-cast state via C microalloying

Realizing strength-ductility combination of Fe3.5Ni3.5Cr2MnAl0.7 high-entropy alloy via coherent dual-phase structure

Effect of Aluminum Addition on the Microstructure, Magnetic, and Mechanical Properties of FeCrCoNiMn High-Entropy Alloy