Abstract:Microbially induced calcium carbonate precipitation (MICP) has attracted much attention as a promising green technique for soil improvement. Despite the significance of precipitation pattern in mind, constitutive relations or numerical models considering the finite‐strain mechanical effects of the various precipitation patterns are rarely developed. In this paper, we propose a novel 3D DEM modeling scheme by using coarse particles to represent sand grains and fines as cementing agents, to reproduce the various precipitation patterns in MICP‐treated sand. Based on the topological relations with adjacent particles and the contribution to the mechanical improvement, the cementing fines are classified into effective, partially effective, surface coating, and pore filling ones. The microstructural characteristics and their evolution upon external loading are investigated quantitatively after a careful calibration and validation. The microstructural variation in experiments can be well reproduced, pinpointing this variation as a possible cause for the fluctuation in experimental data. Massive coating fines are produced accompanying the microstructural degradation, which is initiated by the breakage of effective bonds. The breakage of partially effective bonds may become dominating later in the medium to strong cemented specimens. One weakly cemented specimen shows diffuse failure with simultaneous bond‐breakage and friction. In contrast, the medium to strong cemented specimens show localized failure with the dominating mechanism transiting from bond‐breakage to friction producing notable pore filling fines. We propose a relation between unconfined compressive strength and the equivalent effective volume fraction of cementing agents normalized by the pretreatment porosity, which reveals the coupling effects of the initial configuration and the precipitation pattern on the mechanical improvement.

Quantitative Microstructural Characterization and Seepage Visualization of Biocemented Sand

Laboratory Experiment on Formation of MICP Horizontal Seepage-Reducing Body in Confined Aquifer for Deep Excavation

Identification and extraction of cementation patterns in sand modified by MICP: New insights at the pore scale

Interface Shear Behavior Between MICP-Treated Calcareous Sand and Steel

Micro-macro investigation on bio-cemented sand under different grouting saturation: an effective enhancement method

Spatial Distribution of CaCO3 in Biocemented Sandy Slope Using Surface Percolation

Spatial Distribution of [math] in Biocemented Sandy Slope Using Surface Percolation

Experimental and simulation study of calcium carbonate non-uniform distribution characteristics of bio-cemented sand

Strength, Stiffness, and Microstructure Characteristics of Biocemented Calcareous Sand

Microbially Induced Carbonate Precipitation for Improving the Internal Stability of Silty Sand Slopes under Seepage Conditions

Undrained cyclic responses of biocemented calcareous silty sand

A Substitute for Portland Cement: Experiments on Ecofriendly Reinforcement of Large-Scale Calcareous Sand by Microbial-Induced Carbonate Precipitation Spraying Method

Effect of Relative Density and Biocementation on Cyclic Response of Calcareous Sand

Study on the Relationship Between Mechanical Properties and Mesostructure of Microbial Cemented Sand Bodies

X-ray CT-based interpretation of microbial-induced carbonate precipitation and local hydraulic behaviors

Investigation of the effect of microbial-induced calcite precipitation treatment on bio-cemented calcareous sands using discrete element method

Investigation of Pore-Scale CaCO3 Distributions and Their Effects on Stiffness and Permeability of Sands Treated by Microbially Induced Carbonate Precipitation (MICP)

3D DEM modeling of biocemented sand with fines as cementing agents

Cementation Anisotropy Associated with Microbially Induced Calcium-Carbonate Precipitation and Its Treatment Effect on Calcareous and Quartz Sands

Assessment Of Erosion Resistance Of Biocemented Sandy Slope Subjected To Wave Actions

Comparative Study on Strength and Permeability of Siliceous Sand Treated by MICP and Cement Grouting