Abstract:With the development of a free trade port on Hainan Island, the construction of tourist roads around the island is currently underway. However, the weather conditions on Hainan Island, which include strong typhoons and rainstorms, pose challenges for the construction of highway-cutting slopes on the coastal weak sandy terraces. These slopes are susceptible to sand loss and erosion from rainfall. To address this issue, MICP green spray irrigation solidification technology is used to strengthen the sandy cutting, and pore water pressure monitoring is carried out on the slope model during MICP solidification and rainfall scour. Combined with the model pore water pressure and flow slip failure pattern, a dynamic analysis was conducted. The results show that MICP sprinkler irrigation technology can solidify the surface of the slope model in a short time, and after three sets of rotation reinforcement, the model achieved a cementation depth of 4 cm, with a well-reinforced surface and closely connected sand samples. Under the erosion effect of simulated rainfall intensity, the sand loss of the slope was weakened, without damage to the sand binding, and the integrity was enhanced. The cementation between the sand grains facilitated the conversion of most of the rainfall into runoff. However, despite these efforts, the slope eventually slid after 150 s. During the sliding process, the leading edge of the slope model lost sand and became unloaded, and the failure mode was graded a creep slip failure. Finally, the slope was divided into several blocks due to the continuous expansion of cracks following the slope failure. The erosion stability of the sandy slope under heavy rains was optimized and the sand loss was prevented effectively. This study proposes a new method of MICP remediation techniques that serve as a new test basis for the practical application of MICP technology in engineering projects.

Spatial Distribution of [math] in Biocemented Sandy Slope Using Surface Percolation

Laboratory Experiment on Formation of MICP Horizontal Seepage-Reducing Body in Confined Aquifer for Deep Excavation

A Substitute for Portland Cement: Experiments on Ecofriendly Reinforcement of Large-Scale Calcareous Sand by Microbial-Induced Carbonate Precipitation Spraying Method

Rainfall-Induced Erosion of Biocemented Graded Slopes

Numerical Study of MICP Infiltration and Mineralization in Unsaturated Soils: CaCO 3 Distribution and Critical Depth

Micro-macro investigation on bio-cemented sand under different grouting saturation: an effective enhancement method

Experimental and simulation study of calcium carbonate non-uniform distribution characteristics of bio-cemented sand

Undrained cyclic responses of biocemented calcareous silty sand

Interface Shear Behavior Between MICP-Treated Calcareous Sand and Steel

Study on the Effects and Mechanism of the Reinforcement of Soft Clay Via Microbially Induced Carbonate Precipitation

Identification and extraction of cementation patterns in sand modified by MICP: New insights at the pore scale

A preliminary study of carbonate sand stabilization by bio-stimulation based MICP method

A Coupled Bio-Chemo-hydro-wave Model and Multi-Stages for MICP in the Seabed

Desert Aeolian Sand Cementation Via Microbially Induced Carbonate Precipitation

Permeability experiment study of calcareous sand treated by microbially induced carbonate precipitation using mixing methods

Applicability of Microbial Calcification Method for Sandy-Slope Surface Erosion Control

Bio-cementation of sandy soil using microbially induced carbonate precipitation for marine environments

Durability of MICP-reinforced Calcareous Sand in Marine Environments: Laboratory and Field Experimental Study

Experimental Study on Pore Pressure Variation and Erosion Stability of Sandy Slope Model under Microbially Induced Carbonate Precipitation

Seawater-based Bio-Cementation of Natural Sea Sand Via Microbially Induced Carbonate Precipitation

Investigation of the effect of microbial-induced calcite precipitation treatment on bio-cemented calcareous sands using discrete element method