Abstract:A sensitive and automated method for underway and onboard analysis of trace ammonium in seawater was established using on-line solid phase extraction and fluorescence detection. Ammonium reacted with o-phthalaldehyde and sulfite to produce isoindole derivative that was concentrated on a hydrophilic lipophilic balanced (HLB) cartridge and then rapidly eluted with ethanol and measured using a fluorescence detector. The work was modified from our previous developed method, where 30 mL of a seawater sample was introduced into a reaction bottle with a 10 mL pipette. In the modified method a 10 mL sample loop was adopted for sample introduction to reduce possible contamination caused by manual operation. More importantly, the present method makes underway monitoring much more automatic. The detection limit was 3.5 nmol L-1, and the relative standard deviation was 3.52% (n = 12) for a sample spiked with 40 nmol L-1 ammonium standard. The method was free of the effects of salinity, carry-over and dissolved organic matter, with recoveries between 94.0% and 106.1%. An equation was introduced to correct matrix effects, and pure water and seawater blank were found to be equivalent to ammonium concentration of 8.1 +/- 2.2 nmol L-1 and 6.0 +/- 0.8 nmol L-1, respectively. The correction method can also be introduced to determination of other trace analytes where matrix effect cannot be neglected. A technique of stopped-flow was adopted and stopped-flow time could be adjusted depending on the concentration of ammonium in the seawater samples. The sample throughput was 7-9 h-1, and the method permitted the analysis of samples over a wide range of concentrations. The modified method has been successfully applied for shipboard underway determination of ammonium in a coastal area and shipboard determination the ammonium concentration of discrete samples in three vertical profiles during a cruise in the South

A Novel and Rapid Approach to Fluorescent Automated Lab-In-Syringe Sensing of Ammonium

A Modified Method of On-Line Solid Phase Extraction and Fluorometric Detection for Underway Monitoring and Onboard Analysis of Trace Ammonium in Seawater

Analysis of Ammonium in Seawater by Ion Chromatography with Single-Pump Column Switching

A Modified Method for On-Line Determination of Trace Ammonium in Seawater with a Long-Path Liquid Waveguide Capillary Cell and Spectrophotometric Detection

Flow-injection analysis with fluorescence detection for the determination of trace levels of ammonium in seawater

On-Line Solid Phase Extraction and Spectrophotometric Detection with Flow Technique for the Determination of Nanomolar Level Ammonium in Seawater Samples

Toward Sensitive Determination of Ammonium in Field: A Novel Fluorescent Probe, 4,5-Dimethoxyphthalaldehyde along with a Hand-Held Portable Laser Diode Fluorometer

A Novel Analytical Method For Trace Ammonium In Freshwater And Seawater Using 4-Methoxyphthalaldehyde As Fluorescent Reagent

A Sensitive Flow-Batch System for on Board Determination of Ultra-Trace Ammonium in Seawater: Method Development and Shipboard Application.

An environmentally-benign flow-batch system for headspace single-drop microextraction and on-drop conductometric detecting ammonium

On the Fluorometric Measurement of Ammonium in Oligotrophic Seawater: Assessment of Reagent Blanks and Interferences

Ammonium determination by merging-zone flow injection analysis and a naphthalene-based fluorescent probe

Facile All-Optical Method for in Situ Detection of Low Amounts of Ammonia

Design of Portable Fluorescence Analyzer of Ammonium

Automated Determination of Ammonium in Natural Waters with Reverse Flow Injection Analysis Based on the Indophenol Blue Method with O-Phenylphenol

Development of an Integrated Syringe-Pump-Based Environmental-Water Analyzer (isea) and Application of It for Fully Automated Real-Time Determination of Ammonium in Fresh Water

Evolution of the Fluorometric Method for the Measurement of Ammonium/ammonia in Natural Waters: A Review

A flow injection-fluorometric method for the determination of ammonium in fresh and saline waters with a view to in situ analyses

A Low-cost Two-in-one Fluorescence/ Colorimetry Ammonium Detector: Design and Application

Development and Application of a Portable Fluorescence Detector for Shipboard Analysis of Ammonium in Estuarine and Coastal Waters

A Modified O-Phthalaldehyde Fluorometric Analytical Method for Ultratrace Ammonium in Natural Waters Using EDTA-NaOH As Buffer.