Abstract:Abstract The stiffness and thermal conductivity of thermal barrier coatings (TBCs) are inevitably changed by healing up of intersplat pores and intra-splat cracks during high temperature exposure, which results in less compliance and thermal insulating performance. However most publications on sintering of plasma sprayed TBCs are based on free-standing coatings, which ignore residual stress and the stress produced by the mismatch of thermal expansion coefficient between substrate and ceramic top coatings. In this paper, individual splat of YSZ and YSZ coatings have been sprayed on substrate of YSZ and Ni-based superalloy. Evolution of healing and morphology of 2D cracks and some properties, such as hardness and thermal conductivity, have been revealed during thermal exposure. Results showed that, during heating stage, the shear stress coming from substrate caused some tearing of bonding area tips and narrowing of inter-splat pores. Some recoverable and unrecoverable widening on intra-splat cracks occurred also due to shear stress. During annealing stage, compared with free-standing coating, the surface hardness of the coating deposited onto the Ni-based superalloy showed enhanced increasing due to the faster healing of inter-splat pores by narrowing down, and the hardness in cross-section presented retarding increasing due to the widening of cracks in out-plane direction leading to slower healing. The case of YSZ substrate fell between free-standing case and Ni-based superalloy. This would benefit the further in-depth understanding of the thermal cycling failure mechanism of plasma sprayed TBCs.

Based on energy dissipation investigation of preparation and toughening mechanism of continuous transition coating

Activating Continuous Dislocation Pinning Enhanced Toughness of Nanocomposite Coating Through Specially Oriented Semicoherent Heterointerface Lattice Distortion

Influence of Surface Morphology and Microstructure on Performance of CVD Tungsten Coating under Fusion Transient Thermal Loads

Study on gradient structure and interface mechanical properties of n–8YSZ/AlCoCrFeNi high–entropy coatings

Influence of atomic migration mode at different temperatures on the microstructure, mechanical and cavitation erosion behaviors of Co-based alloy coating

Microstructure characterization of in-situ ZrC composite coating with graceful toughness and improved tribological properties prepared by plasma spraying

Investigation of microstructure changes in Al2O3-YSZ coatings and YSZ coatings and their effect on thermal cycle life

Mechanism for magnetic field induced structural relaxation and accompanying fracture toughness improvement of the thermal spraying coating

Structural Characteristics and Evolution in the Crack Propagation Process of NiCrAlY/YSZ Gradient Coatings Through Thermal Shock at 900 °C

Phase transitions and microstructure evolutions of in-situ YSZ-ZrC composite coating under long-time plasma torch ablation

Tribological property and thermal shock resistance of NiCoCrAlY coated YSZ composite coatings prepared by different laser additive manufacturing scanning speeds

Study on the Controlled Preparation and Thermal-Mechanical Properties of Plasma Sprayed Ceramic Coatings with Whiskers Toughness

Strain-induced Multiscale Structural Changes in Lamellar Thermal Barrier Coatings

Understanding the relationship between microstructure and mechanical behavior of plasma-sprayed amorphous Al2O3–YAG ceramic coating based on depth-sensing indentation measurements

EBSD analysis of microstructure changes in YSZ coatings during thermal cycling

Superior toughness of thermal barrier coating caused by co-doping of trivalent and pentavalent oxides

Constrained Healing and Morphology Change Mechanism of 2D Cracks in Plasma Sprayed Thermal Barrier Coatings

Assessment of the Performance of Y2SiO5-YSZ/YSZ Double-Layered Thermal Barrier Coatings

Comparative Study of the Residual Stress in Plasma Sprayed Nanostracture and Conventional Structure Coatings

Microstructure and electronic structure of Cr2C and Fe2Y in the Cr-coating prepared by pack-cementation on the surface of ODS steel

Microstructure characterization and thermal conductivity analysis of plasma sprayed ZrO 2 coatings