Abstract:In thermoelectric materials, phase boundaries are crucial for carrier/phonon transport. Manipulation of carrier and phonon scatterings by introducing continuous interface modification has been shown to improve thermoelectric performance. In this paper, a strategy of interface modification based on powder atomic layer deposition (PALD) is introduced to accurately control and modify the phase boundary of pure bismuth. Ultrathin layers of Al2O3, TiO2, and ZnO are deposited on Bi powder by typically 1–20 cycles. All of the oxide layers significantly alter the microstructure and suppressed grain growth. These hierarchical interface modifications aid in the formation of an energy barrier by the oxide layer, resulting in a substantial increase in the Seebeck coefficient that is superior to that of most pure polycrystalline metals. Conversely, taking advantage of the strong electron and phonon scattering, an exceptionally large decrease in thermal conductivity is obtained. A maximum figure of merit, zT, of 0.15 at 393 K and an average zT of 0.14 at 300–453 K were achieved in 5 cycles of Al2O3‐coated Bi. The ALD‐based approach, as a practical interfacial modification technique, can be easily applied to other thermoelectric materials, which can contribute to the development of high‐performance thermoelectric materials of great significance. A surface/interface modification technology based on atomic layer deposition concept is introduced to precisely tune the phase boundary composition of pure bismuth with ultrathin layers of Al2O3, TiO2, and ZnO oxides. Using the strong electron and phonon scattering, a maximum figure of merit (zT) of 0.15 at 393 K was attained for modified Bi with 5 cycles ALD of Al2O3.

Phase Interface Engineering Enables State-of-the-art Half-Heusler Thermoelectrics

High thermoelectric performance in ZrNiSn through electron injection and boosting carrier mobility

Recent advances in atomic layer deposition-based interface modification engineering in thermoelectric materials

Phase Boundary Mapping in ZrNiSn Half-Heusler for Enhanced Thermoelectric Performance

Establishing the Carrier Scattering Phase Diagram for ZrNiSn-based Half-Heusler Thermoelectric Materials

Half Heusler Alloys for Efficient Thermoelectric Power Conversion

Zr vacancy interface: an effective strategy for collaborative optimization of ZrNiSn-based thermoelectric performance

Precision Interface Engineering of an Atomic Layer in Bulk Bi2Te3 Alloys for High Thermoelectric Performance

Current State‐of‐the‐Art in the Interface/Surface Modification of Thermoelectric Materials

Thermal-inert and ohmic-contact interface for high performance half-Heusler based thermoelectric generator

CALPHAD Accelerated Design of Advanced Full-Zintl Thermoelectric Device

Improving the thermoelectric performance of double half-Heusler compounds ZrNi(In,Sb)

Effect of Powder ALD Interface Modification on the Thermoelectric Performance of Bismuth

Enhanced Thermoelectric Performance of SnTe-Based Materials via Interface Engineering

Effective Atomic Interface Engineering in Bi2Te2.7Se0.3 Thermoelectric Material by Atomic-Layer-deposition Approach

Multiphase Coherent Nanointerface Network Enhances Thermoelectric Performance for Efficient Energy Conversion and Contactless Thermosensation Applications in GeTe

Engineering the Thermoelectric Transport in Half‐Heusler Materials through a Bottom‐Up Nanostructure Synthesis

Realizing High Figure of Merit in Phase-Separated Polycrystalline Sn1-Xpbxse

Enhancement in the thermoelectric performance of ZrNiSn-based alloys through extra Zr-rich nanoprecipitates with superstructures

Giant Thermal Transport Tuning at a Metal/Ferroelectric Interface

Atomistic study of an ideal metal/thermoelectric contact: The full-Heusler/half-Heusler interface