Abstract:Generally, optical methods for precision measurement have limitations when rotation of large angle (larger than 10°) and translation of large range occur simultaneously. To deal with the problem, an improved method based on spatial magnetic detection is proposed for planar 3-degree-of-freedom position measurement with large ranges in this article. The position-solving algorithm of the method calculates position by decoupling 3 degrees of freedom with the magnetic flux densities of the inherent magnetic field of the permanent-magnet synchronous planar motor detected by the proposed Hall-sensor array. On the basis of previous work, the calculation approach of decoupling is improved; as a result, the calculations for solving position are simplified. The characteristics of the sensor topology are exploited further, and a new calculation approach of decoupling is introduced to compensate the original one, achieving better robustness to noise. The ability of solving 3-degree-of-freedom position and the robustness to noise and magnetic-field imperfections are evaluated by simulation; the results show that the accuracies of translational and rotational motions are 10 µm scale and 0.1° scale in the case with noise of 0.01% of signal amplitude, while they are 100 µm scale and 10° scale in the case with the magnetic-field imperfections caused by parameter deviations. Comparison experiments with commercial sensors are conducted on a self-developed testing platform to verify the feasibility of the method, and the results show that the method can achieve sensing a large rotational angle and a large translational range with a simple implementation.

An Absolute Inductosyn Angle Measuring Method Based on Data Fusion Algorithm

High-Frequency Signal Injection-Based Sensorless Control for Dual-Armature Flux-Switching Permanent Magnet Machine

A Novel Absolute Angle-Measuring Method With Rotary Inductosyn

A Novel Open-Loop Inductosyn Angle-Measuring System Based on Synchronous Sampling and Definite Integral

Sensorless Control Strategy for Multiphase Induction Motor with Stator and Rotor Resistance Identification Based on Injecting Third Harmonic Current

Absolute Inductive Angular Displacement Sensor for Position Detection of YRT Turntable bearing

Study on the Multiperiod Bipolar Inductive Absolute Angle Sensor

Research of Sensorless Control for Multiphase Induction Motor Based on High Frequency Injection Signal Technique

Absolute Angle Calculation for Magnetic Encoder Based On Magnetic Flux Density Difference

Adaptive Sensorless Control of High Speed Surface-Mounted PMSM Drives with Inductance Estimator Based on Current Error

An Inductive Sensor for the Angular Displacement Measurement of Large and Hollow Rotary Machinery

Error Measuring System of Rotary Inductosyn

Research on high-precision encoder based on optical-magnetic combination structure to measure absolute angle

Analysis and Error Separation of Capacitive Potential in the Inductosyn

A New Method for Measuring the Rotational Angles of a Precision Spherical Joint Using Eddy Current Sensors

A Position Measurement Method for 3-Degree-of-freedom Motion Based on Magnetic Detection.

A New Kind of Absolute Magnetic Encoder

Joint angle measurement of manipulator and error compensation based on an IMU sensor

A Novel Method and System Implementation for Precise Estimation of Single-Axis Rotational Angles

An Acquisition Method of Agricultural Equipment Roll Angle Based on Multi-Source Information Fusion

Stray Flux-Based Rotation Angle Measurement for Bearing Fault Diagnosis in Variable-Speed BLDC Motors