Abstract:The enhancement in selectivity of nanofiltration (NF) membranes is of great significance for extending the application areas and improving the process economy, especially for the separation of monovalent/divalent ions. The characteristics of moderately increased pore size, fewer nonselective defects and a more uniform structure are conducive to NF membrane exhibiting higher rejection of divalent ions but lower rejection of monovalent ions. Nonylphenol polyoxyethylene ether (NP-10) was introduced in interfacial polymerization process in this study to optimize the microstructure and surface properties of polyamide (PA) layer to manufacture highly selective NF membranes. The hydrophobic benzene ring and aliphatic chain in NP-10 could form a local space that restricted the interfacial polymerization reaction on the side of the oil phase, thereby appropriately increasing the pore size of the PA layer. It was advantageous to the permeation of water molecules and monovalent ions with a smaller radius. The long hydrophilic oxyethylene group as a guide could facilitate the uniform diffusion of the monomer to the water/hexane interface. NP-10 as an amphiphilic substance would form a self-assembled network at the water/hexane interface, which was expected to optimize the distribution of aqueous amine monomers at the phase interface. Meanwhile, introducing NP-10 can form a stable interface and reduce the interface disturbance, thus inhibiting the formation of non-selective macropores (or “defects”) in PA layer, which could improve the separation selectivity of monovalent/divalent ions. In addition, the hydrophilicity and electronegativity were also enhanced. The results showed that the MWCO of NF membrane increased from 210.1 Da (TFC-0) to 269.6 Da (TFC-0.25), and the average pore radius increased from 0.248 nm to 0.276 nm. The water flux of optimized membrane was doubled compared to the control membrane. Most important, the optimized exhibited higher rejection of divalent Na2SO4 (from 98.07% to 99.43%), and meanwhile lower rejection of monovalent NaCl (from 54.07% to 27.52%). NaCl/Na2SO4 separation factor reached up to 130.53, which was about four times of TFC-0 membrane.

Engineering Nano-Nodular Pattern on the Substrate Surface by Tuning Phase Inversion to Construct Ultrapermselective Ion-Separation Nanofiltration Membrane

Membranes with Negatively-Charged Nanochannels Fabricated from Aqueous Sulfonated Polysulfone Nanoparticles for Enhancing the Rejection of Divalent Anions

Tailoring Pore Size of Positively-Charged Nanofiltration Membrane Via a Facile Self-Assembly Method

Amphiphilic Interlayer Regulated Interfacial Polymerization for Constructing Polyamide Nanofiltration Membranes with High Perm-Selectivity of Mono-/Divalent Salts

An Efficient Co-Solvent Tailoring Interfacial Polymerization for Nanofiltration: Enhanced Selectivity and Mechanism

Polyamide nanofiltration membrane with high mono/divalent salt selectivity via pre-diffusion interfacial polymerization

Enhancing Ion Separation Efficiency: Janus Charged Nanofiltration Membrane Fabricated via Polyethyleneimine-Manipulated Interfacial Polymerization

Highly Permeable Polyamide Nanofiltration Membrane Mediated by an Upscalable Wet-Laid EVOH Nanofibrous Scaffold

Exploitation of Amine Groups Cooped up in Polyamide Nanofiltration Membranes to Achieve High Rejection of Micropollutants and High Permeance of Divalent Cations

Finely Tailored Pore Structure of Polyamide Nanofiltration Membranes for Highly-Efficient Application in Water Treatment

Innovative role of polyvinylpyrrolidone in tailoring polyamide layer for high-performance nanofiltration membranes

Innovative construction of nano-wrinkled polyamide membranes using covalent organic framework nanoflowers for efficient desalination and antibiotic removal

Preparation of highly selective nanofiltration membranes by moderately increasing pore size and optimizing microstructure of polyamide layer

Water recovery from the high salinity brine: Effect of the interlayer structure in the polyamide nanofiltration membrane

Polyamide Membrane with Nanoscale Stripes and Internal Voids for High-Performance Nanofiltration

Enhancing the perm-selectivity of thin-film nanocomposite membranes intercalated with cyclodextrin-chelated Metal-Organic Framework via modulated interfacial polymerization

High Permeance Polyamide Nanofiltration Membranes Based on Poly(l-lactic Acid) Electrospun Nanofibrous Membranes with Controlled Hydrophilicity

Nanofiltration membranes with enhanced performance by constructing an interlayer integrated with dextran nanoparticles and polyethyleneimine coating

Superior Nanofiltration Membranes with Gradient Cross-Linked Selective Layer Fabricated Via Controlled Hydrolysis

Rod-coated PVA interlayer induced nanofiltration membrane: Method development and application for separation of dye/NaCl with greater performance

Surface Effect-Tailored Polymer Membranes with an Integrated Extra-Thin Separation Layer for Robust Nanofiltration