Abstract:Gas fracturing，as a new type of waterless fracturing technology，is important to the exploitation of shale gas. In order to explore the failure mechanism of shale with bedding planes of different directions due to the gas fracturing，the anisotropic mechanical properties of black shale from Pengshui were systematically analyzed. The gas fracturing tests on the axis of the shale samples parallel to and perpendicular to the direction of bedding plane were performed using the reformed assembly of high pressure gas fracturing system respectively. The effect of the directions of bedding plane on the deformation，strength，AE characteristic and failure modes was discussed and failure mechanism of shale was revealed. The effect of layer on the shale strength under different loading modes was discussed. The effect of bedding plane directions on the tension-compression properties of black shale is obvious. The ratios in compressive strength，tensile strength，elastic modulus and shear modulus of the samples with the axis vertical to bedding plane direction and the samples with the axis parallel to bedding plane direction are 138.22%，44.37%，169.17%，173.27%，respectively. However，the effect of bedding inclination on Poisson?s ratio of shale is not apparent. The failure strength and failure time of the samples with the axis vertical to bedding plane direction are 4.2 times and 3.35 times greater than the samples with the axis parallel to bedding plane direction respectively. The former appeared the tensile failure along a weaker bedding layer and the latter mainly produced the tensile failure，but the shear failure can be also found in the latter resulting in an uneven fracture surface. The deformation carves are nonlinear. The deformation of the samples with the axis vertical to bedding plane direction is larger，and the abnormal inflection point and down concave trend in the lateral deformation curves were shown clearly in this case. While for the samples with the axis parallel to bedding plane direction，the deformation curves are relatively smooth and the concave trend was shown in the lateral deformation curves. The samples with the axial vertical to bedding plane direction were failed more violently according to the results of AE energy rate. The loading modes affected the bedding effect coefficient of shale strength significantly，and the gas fracturing test affected the most and the uniaxial compression test affected the least.

The Effects of Three-Dimensional Bedding on Shale Fracture Behavior: Insights from Experimental and Numerical Investigations

Experimental and Numerical Investigation of the Effect of Bedding Layer Orientation on Fracture Toughness of Shale Rocks

Influence of Bedding on Fracture Toughness and Failure Patterns of Anisotropic Shale

Mesoscale Fracture Behavior of Longmaxi Outcrop Shale with Different Bedding Angles:Experimental and Numerical Investigations

Brazilian Splitting Experiment and Finite Element Simulation Analysis of the Influence of Bedding Loading Angle on Shale Fracture Mode

Effects of Bedding Geometry and Cementation Strength on Shale Tensile Strength Based on Discrete Element Method

Role of bedding plane in the relationship between Mode-I fracture toughness and tensile strength of shale

3D anisotropic microcracking mechanisms of shale subjected to direct shear loading: A numerical insight

Effects of Strain Rate and Bedding on Shale Fracture Mechanisms

Effects of Different Bedding Angles and Impact Angles on the Dynamic Tensile Properties of Thermal-Treated Shale after Cooling Treatment

Study on Fracture Behavior of Bedded Shale in Three-Point-bending Test Based on Hybrid Phase-Field Modelling

Numerical Investigation of Bedding Plane Parameters of Transversely Isotropic Shale

Research on the anisotropic fracture behavior and the corresponding fracture surface roughness of shale

Study on the induced effect of bedding weakness in deep shale gas reservoir on hydraulic fractures propagation

Experimental and Numerical Simulation Study of the Dynamic Crack Propagation and Fracture Properties of Bedding Shale Using Notched Semi-Circular Bend

Experimental Study on the Effect of Loading Angle on Crack Propagation in Bedding Shale

The Influence of Bedding Planes on Tensile Fracture Propagation in Shale and Tight Sandstone

Evaluating the Mechanical Properties of Anisotropic Shale Containing Bedding and Natural Fractures with Discrete Element Modeling

Discrete Element Simulation of the Mechanical Properties of Shale with Different Bedding Inclinations under Conventional Triaxial Compression

Mechanical property and bedding inclination effect on gas fracturing of black shale

Interference Behaviour between Bedding Planes and Hydraulic Fractures and Its Influence on the Complex Fracture Network in Shale