Abstract:Abstract A long sought objective of MEMS research within the oil & gas industry has been the realization of “FT-IR on a chip,” which could hold the potential to migrate laboratory grade chemical spectroscopy into downhole sensor suites. A fundamental obstacle to this research has been the cooling demands of conventional technologies which conflict with the miniaturized sensor volumes required in downhole logging systems and environmental conditions that routinely exceed 125 • C. Near centimeter scale spectroscopic devices are required by a majority of downhole sensor suites, which stands in stark contrast to multiple-decimeter size conventional devices. Here we report a near-centimeter scale FT-MIR ATR spectrometer compatible with downhole volumetric and temperature constraints. The spectrometer is based upon a high-temperature broadband mid-infrared metasurface detector/source combination derived from a geometric inversion of a set of conformal mapping contours. The metasurface elemental structure is derived from a geometric inversion of the canonical TanCirc conformal mapping contours and was found to exhibit a near zero index metamaterial (NZIM) behavior over a spectral range of interest for downhole chemical spectroscopy. The NZIM properties of the metasurface lead to an absorption phenomenon characterized by surface plasmon resonances which confine the absorption mechanism within the ultrathin (λ /300) metasurface plane and make the absorption properties of the microbolometer design relatively insensitive to the material properties of the remaining laminae. This unusual feature allows the metasurface to be integrated on a single VO 2 material thermometric layer and operated at elevated downhole temperatures despite corresponding to the VO2 metal-insulator-transition (MIT) region. Within this transition region however the VO2 layer exhibits a substantially beneficial property in that the VO 2 layer exhibits more than an order of magnitude enhancement in its ambient thermometric properties, leading to an uncooled microbolometer design with predicted maximum detectivity D * = 1.5 × 10 10 cm √ Hz/W and noise equivalent difference temperature NEDT of 1 mK at a modulation frequency of 500 Hz. A sub-millimeter scale thermal infrared source with intrinsic mid-infrared band-limited emission is formed from the same cellular geometric building block, enabling the spectrometer miniaturization. These performance parameters compare well with lower tier laboratory grade FT-MIR spectroscopic instruments and could represent a significant step in the effort towards deploying miniaturized high-temperature mid-infrared spectroscopy into oilfield downhole logging applications.

Single 5-Centimeter-aperture Metalens Enabled Intelligent Lightweight Mid-Infrared Thermographic Camera

Lightweight Long-Wave Infrared Camera via a Single 5-Centimeter-Aperture Metalens

Metalens-integrated Compact Imaging Devices for Wide-Field Microscopy

Design of A Panoramic Long-Wave Infrared Athermal System

Colorimetric Thermography by a Long-Infrared Dual-Band Metalens.

Aberration-corrected hybrid metalens for longwave infrared thermal imaging

Multi-sensor Spatial Augmented Reality for Visualizing the Invisible Thermal Information of 3D Objects

Ultra-thin, Zoom Capable, Flexible Metalenses with High Focusing Efficiency and Large Numerical Aperture

Depth and Thermal Sensor Fusion to Enhance 3D Thermographic Reconstruction

An On-Line Temperature Monitoring Device

Multispectral Camouflage for Infrared, Visible, Lasers and Microwave with Radiative Cooling.

Doublet Metalens with Simultaneous Chromatic and Monochromatic Correction in the Mid-Infrared

Design of a Catadioptric Mid-Wave Infrared Telecentric Microscope with High Numerical Aperture and Long Working Distance

Largest Aperture Metalens of High Numerical Aperture and Polarization Independence for Long-Wavelength Infrared Imaging.

Compact meta-optics infrared camera based on a polarization-insensitive metalens with a large field of view

Large Field-of-View Thermal Imaging via All-Silicon Meta-Optics

Robust Achromatic All-Dielectric Metalens for Infrared Detection in Intelligent Inspection

Large-aperture imaging system based on 100 mm all-Si metalens in long-wave infrared

Near Centimeter-scale FT-MIR Spectrometer based on NZIM Perfect Absorption using Inverted TanCirc Conformal Mapping Geometry

Broadband achromatic thermal metalens with a wide field of view based on wafer-level monolithic processes

Realization of Achromatic and Wide-Field Doublet Metalens in Mid-Infrared Spectra