Broadband Absorptive Metamaterials Enhanced by Magnetic Rubber to Broaden Bandwidth

Hongbiao Cui,Kun Liu,Hanyang Gao,Lucong Lu,Guoxin Hu

DOI: https://doi.org/10.1016/j.mssp.2024.108668

IF: 4.1

2024-01-01

Materials Science in Semiconductor Processing

Abstract:A method to extend the operational bandwidth of metal-dielectric-metal (MDM) type absorptive metamaterials is proposed. An ultrathin, five-band absorptive metamaterial with wide-angle absorption and polarization sensitivity in the X-band is designed. The total absorption bandwidth across the five bands, with reflection losses below -10 dB (absorption rate greater than 90 %), is nearly 1 GHz. The physical mechanisms of absorption are analyzed through the distributions of surface current, electric field, and magnetic field. Samples were fabricated and tested, and the results were consistent with the simulation outcomes. To enhance the bandwidth of the absorptive metamaterial and its application prospects, magnetic materials such as barium ferrite and carbonyl iron were introduced into a rubber vulcanization layer, which was then combined with the ultrathin absorptive material to create a novel absorptive material. When the magnetic material content in the rubber layer was 50 wt %, the frequency range with reflection losses below -10 dB increased by approximately nine times, covering 69.5 % of the C-Ku band. This significantly broadens the bandwidth of the pure MDM-type absorptive metamaterial, providing a feasible solution for the design of broadband ultrathin absorptive materials.