Abstract:In order to verify the feasibility of three-dimensional (3D) printing technology in preparing the metamaterial absorbers with complex structure, a three-layer broadband absorbing metamaterial is designed and fabricated by 3D printing technology. The surface layer and middle layer of the metamaterial are composed of periodic arrays with different unit dimensions and the bottom layer of a slab structure. The optimized thickness of the metamaterial is 4.7 mm. A composite absorbent which consists of carbonyl iron powder and nylon is used to fabricate the absorber. In experiment, the obtained absorber is vertically irradiated by an electromagnetic (EM) wave. Two strong absorption peaks at 5.3 GHz and 14.1 GHz are achieved, with the reflection losses of -15.1 dB and -12.5 dB, respectively. The superposition of the two absorption peaks results in a reflection loss below -10 dB in a range from 4 to 18 GHz. The effective EM parameters of the surface layer and the middle layer are calculated by the S parameter inversion method. An effective model of the three-layer structure absorber is proposed and its reflectivity is calculated by using a multilayer structure reflectivity formula. The calculated reflectivity agrees well with the measured one. The absorbing and resonance mechanisms of the two absorption peaks are investigated by analyzing the dynamic distributions of power density loss, electric field and magnetic field. It can be clearly confirmed that the reflection losses at 5.3 GHz and 14.1 GHz are primarily concentrated on the bottom layer and surface layer, and the broadband absorption performance can be derived from the superposition of broadband absorptions of the three absorbing layers. Meanwhile, the strong electric coupling effect between the adjacent units in the surface layer is demonstrated by analyzing the electric-field distributions, which indicates that the strong reflection loss at 14.1 GHz is mainly caused by the electric response. The multiple scattering effects among the three layers are also considered according to the magnetic field distributions at two resonance frequencies. It is shown that there are two magnetic responses at 5.3 GHz and 14.1 GHz, respectively, and the multiple scattering contributes to increasing the EM wave propagation distance and enhancing the power loss. The designed absorbing metamaterials in this paper achieve good broadband absorption performances, particularly in the low frequency band. Combined with 3D printing rapid technology, a promising route to constructing 3D absorbing metamaterials with complex structures is proposed, which would be of great significance and broad practical prospect.

Broadband Microwave Absorption Property of a Thin Metamaterial Containing Patterned Magnetic Sheet

Broadband Metamaterial Absorber with an In-Band Metasurface Function.

Low frequency absorption properties of a thin metamaterial absorber with cross-array on the surface of a magnetic substrate

A THIN AND BROADBAND MICROWAVE ABSORBER BASED ON MAGNETIC SHEETS AND RESISTIVE FSS

Magnetic Medium Broadband Metamaterial Absorber Based on the Coupling Resonance Mechanism

A Broadband Metamaterial Microwave Absorber Utilizing Both Magnetic and Electric Resonances

Ultra-broadband microwave absorption by ultra-thin metamaterial with stepped structure induced multi-resonances

Design of a High-Efficient Metamaterial X-band Absorber Composed of a Dielectric Cylinder Combined with a Thin Magnetic Cylinder Unit

A Broadband Metamaterial Absorber Design Using Characteristic Modes Analysis

Material–structure Integrated Design for Ultra-Broadband All-Dielectric Metamaterial Absorber

Study on broadband metamaterial microwave absorber

An Ultrathin Tunable Metamaterial Absorber for Lower Microwave Band Based on Magnetic Nanomaterial

Broadband Microwave Metamaterial Absorber with Lumped Resistor Loading

A flexible metamaterial based on liquid metal patterns embedded in magnetic medium for lightweight microwave absorber

Ultra-broadband Microwave Absorber with P-band Absorption Based on Magnetic Material and Lumped Element

Broadband Microwave Metamaterial Absorber Based on Magnetic Periodic Elements

The design and fabrication of a broadband meta -material absorber based on a double-layer ring structure

Ultra-Thin and Broadband P-Band Metamaterial Absorber Based on Carbonyl Iron Powder Composites

Flexible Ultrathin Metamaterial Absorber for Wide Frequency Band, Based on Conductive Fibers

Material-structure integrated design for ultra-broadband microwave metamaterial absorber

Structural Broadband Absorbing Metamaterial Based on Three-Dimensional Printing Technology