Numerical Study on the Influence of Fuel Jet Characteristics on the Pure Ammonia-Fuelled Swirl Diffusion Flame

Baohua Zhang,Yishu Xu,Zhicheng Xie,Jianhua Tu,Wenjun He,Mingxin Qu,Xiaowei Liu
DOI: https://doi.org/10.1016/j.joei.2024.101737
IF: 6.47
2024-01-01
Journal of the Energy Institute
Abstract:The combustion and NO emission performance of pure ammonia in a 10 kWth swirl burner originally for natural gas was simulated, and the influence of adjusting ammonia jet parameters on the swirl flame was further investigated for optimizing burner design. It was found that the swirl intensity has a greater influence on the mixing of fuel and air and the early ignition stage, while the turbulence intensity has a greater influence on the combustion and burnout stage. In the study, reducing the diameter of fuel nozzle (from 3.6 mm to 2.4 mm) and increasing the jet angle of fuel nozzle (from 0° to 30°) would significantly reduce the ignition distance by 9.1%–54.5 %, and lead to an increase of 265 ppm (37.1 %) and a decrease of 183 ppm (26.7 %) in the peak concentration of NO respectively, due to enhanced recirculation of the hot flue gas and mixing of the fuel and air by the improved swirling intensity. Meaningfully, the formation of thermal NO and ammonia-derived fuel NO could be controlled respectively by reducing the flame temperature and promoting the pre-pyrolysis of ammonia into H2 and N2 via reasonable fuel jet. In the end, an optimized burner structure with the jet angle and diameter of fuel nozzle of 30° and 3.6 mm as well as fuel jet parameters for stable low-NO combustion of pure ammonia were obtained based on the prototype burner.
What problem does this paper attempt to address?