Abstract:Recently, metal-organic frameworks (MOFs) and their carbon derivates have been demonstrated as new electrode modifying materials for electrochemical sensing. In this work, the first example of the detection of heavy metal ions with a MOF-derived sensing platform was presented. The platform was based on a glassy carbon electrode (GCE) modified by Nafion-bismuth/nitrogen doped microporous carbon (NMC) composite, in which the NMC was derived from a zeolitic imidazolate framework-8 (ZIF-8). The good dispersibility, large specific surface area (941 m2g−1), high nitrogen content (25.0 at.%) and good electrical conductivity of the NMC materials, as well as the synergistic effects of Nafion and bismuth-film contributed to the enhanced signals of the electrode during the differential pulse anodic stripping voltammetry (DPASV) measurements for simultaneous detection of trace Cd(II) and Pb(II) in aqueous solution. The calibration curves for Cd(II) covered two linear ranges varying from 2 to 10μgL−1 and 10 to 100μgL−1. As for Pb(II), the linear calibration curves ranged from 0.5 to 10μgL−1 and 10 to 100μgL−1. The detection limits were estimated to be 1.5μgL−1 (S/N=3) for Cd(II) and 0.05μgL−1 (S/N=3) for Pb(II), which were 2 times and 200 times lower than the guideline values of drinking water given by the World Health Organization (WHO), for Cd(II) and Pb(II), respectively. In addition, the good reproducibility and stability of the modified electrode offered a promising perspective for the detection of trace metal ions in practice. Compared with other porous carbon modified electrodes that obtained by either drop-casting or screen-printing method, the proposed Nafion/Bi/NMC/GCE showed a much lower detection limit for Pb(II) and a lower or comparable detection limit for Cd(II). Moreover, the obtaining of uniformly ordered N-doped carbon polyhedron could shed light on the preparation of other heteroatom-doped electrode modifying materials for the detection of heavy metal ions.

Electrochemical Detection of Pb(II) Ions in Aqueous Solution by Carbon Nanospheres Modified Boron-Doped Diamond Electrode

Simultaneous Determination of Cd(II) and Pb(II) Ions in Honey and Milk Samples Using a Single-Walled Carbon Nanohorns Modified Screen-Printed Electrochemical Sensor.

Nano-Needle Boron-Doped Diamond Film with High Electrochemical Performance of Detecting Lead Ions

Detecting Lead Ion in Water with Boron-Doped Diamond Film Electrode

Highly selective and sensitive Pb 2+ detection via sulfur-doped graphitic carbon nitride modified by Bi nanospheres

Development of a Boron-Doped Diamond Electrode for the Simultaneous Detection of Cd2+ and Pb2+ in Water

Two-dimensional BCN nanosheets self-assembled with hematite nanocrystals for sensitively detecting trace toxic Pb(II) ions in natural water

In-situ graphene modified self-supported boron-doped diamond electrode for Pb(II) electrochemical detection in seawater

Fabrication of Boron-Doped Diamond Film Electrode for Detecting Trace Lead Content in Drinking Water

Electroanalytical Sensing of Trace Cd (II) Using in-situ Bismuth Modified Boron Doped Diamond Electrode

High Electrochemical Performance for Pb(Ii) Detection Based on N,S Co-Doped Porous Honeycomb Carbon Modified Electrodes

A High–selectivity Electrochemical Sensor for Ultra-Trace Lead (II) Detection Based on a Nanocomposite Consisting of Nitrogen-Doped Graphene/gold Nanoparticles Functionalized with ETBD and Fe3O4@TiO2 Core–shell Nanoparticles

Graphene Modified Carbon Nanosheets For Electrochemical Detection Of Pb(Ii) In Water

Simultaneous detection of Cd(II) and Pb(II) by differential pulse anodic stripping voltammetry at a nitrogen-doped microporous carbon/Nafion/bismuth-film electrode

A Nanograss Boron and Nitrogen Co-Doped Diamond Sensor Produced via High-Temperature Annealing for the Detection of Cadmium Ions

Ultrasensitive Voltammetric Detection of Trace Lead(II) and Cadmium(II) Using MWCNTs‐Nafion/Bismuth Composite Electrodes

Sensitive and Selective Differential Pulse Voltammetry Detection of Cd(II) and Pb(II) Using Nitrogen-Doped Porous Carbon Nanofiber Film Electrode

A novel nanoporous bismuth electrode sensor for in situ heavy metal detection

Size Dependent Electrochemical Detection of Trace Heavy Metal Ions Based on Nano-Patterned Carbon Sphere Electrodes.

A Novel Thin-Layer Flow Cell Sensor System Based on BDD Electrode for Heavy Metal Ion Detection

Bismuth Nanoclusters/Porous Carbon Composite: A Facile Ratiometric Electrochemical Sensing Platform for Pb 2+ Detection with High Sensitivity and Selectivity