Abstract:This article proposes a hybrid signal injection-based maximum torque per ampere (MTPA) control for dual three-phase permanent magnet synchronous machines (PMSMs). The proposed method consists of a real dc current injection in the harmonic subspace and a virtual ac current injection in the fundamental subspace. The real dc current injection in the harmonic subspace does not impact the average torque production, and induced losses are small enough to be neglected. In the meantime, to guarantee the accuracy of the proposed MTPA method, a novel machine parameter estimation scheme considering voltage source inverter nonlinearity effects is proposed in this article, which can track the variation of $q_{1}$ -axis inductance and resistance accurately. Therefore, the proposed method only requires command voltages and currents in the torque model, and the variations of machine parameters are compensated by the proposed parameter estimation scheme. As the command voltages have correspondence with the variations of machine parameters, the magnetic saturation and temperature effects have been taken into account. The proposed method is validated by simulations and experimental results under various torque, speed, and temperature conditions. Additionally, the accuracy of the proposed method is validated, and its performance is proven to be superior through comparison of the derived results with those obtained from various existing methods.

Improved MTPA Acquisition for SynRM Based on Golden Section Searching Considering Magnetic Saturation Effect

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Optimized Direct Instantaneous Torque Control for SRMs With Efficiency Improvement

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

MTPA Control for Scalar Controlled Synchronous Reluctance Motor

Maximum Torque Per Ampere Control of IPMSM Based on Online Parameter Identification Considering Cross-coupling and Saturation Effects

Accurate MTPA Strategy of PMSM Considering Cross Saturation Effect Based on Full-Flux-Linkage Model

Automated Maximum Torque per Ampere Identification for Synchronous Reluctance Machines with Limited Flux Linkage Information

Power Perturbation Based Virtual Signal Injection Control of MTPA for IPMSM Drive System

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Loss Minimization Control of PMSM Using Gradient Descent Algorithm

A Loss Minimization Control Method for IPMSM Drive System Based on Improved Gradient Descent Algorithm.

Quantitative Harmonics Performance Evaluation of High-Speed Permanent Magnet Synchronous Machine under Various Synchronous SVPWM Strategies

Parameter Identification for Maximum Torque per Ampere Control of Permanent Magnet Synchronous Machines under Magnetic Saturation

Novel Machine Parameter Estimation Scheme Toward Accurate Maximum Torque Production for Dual Three-Phase PMSMs

Synchronous Reluctance Motor Performance Improvement Using MTPA Control Strategy and Five-Level Inverter Topology

Maximum-Torque-per-Square-Ampere Control for Interior PMSMs Considering Cross-Saturation Inductances

Direct Torque Control Combined with Mtpa Concept for Open Winding Ipmsm

Research on MTPA Control Strategy of Permanent Magnet Synchronous Motor Based on Fast SVPWM Algorithm

A MTPA Control Strategy for Mono-Inverter Multi-PMSM System

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation