Abstract:The design and fabrication of micro components of pure titanium thin sheets face a challenging problem with size effects. Size effects will affect the plastic deformation mechanism of thin sheets in addition to causing unpre-dictable flow stresses. Although the impact of size on strength is obvious, further research is still needed, particularly for metal thin sheet with HCP lattice, to thoroughly understand the impact on deformation mech-anisms. To assess the size effects on flow stress, uniaxial tensile experiments were carried out on specimens with varying thicknesses and grain sizes in this work. Additionally, Electron Backscattered Diffraction (EBSD) tech-nology was used to analyze the dislocation evolution and twinning behavior in surface and inner grains for specimens with various thicknesses and grain sizes employing electrolytically polished specimens under different strain conditions. The results demonstrate that the feature size (t/d) has a substantial impact on the flow stress of pure titanium sheet, as seen by a rapid reduction in flow stress when t/d < 7. Microstructure analysis showed that the feature size effect has a significant impact on the deformation mechanism. Inhomogeneous strain distribution and geometrically necessary dislocation (GND) density distribution are produced by the reduction in thickness and the increase in grain size. There is a change from slip dominated to slip-twin deformation mechanism as the t/d decrease. Decreased twin nucleation stress and worsened inhomogeneous deformation are the inherent causes of twin activation as t/d decreases. When the t/d is less than 1, the dislocation starving mechanism causes a paradoxical increase in the flow stress. Furthermore, there are similarities and variances between the surface and the inner grains. Regarding GND density, there is not much of a difference between the two. However, there is a significant difference between the two in terms of twin volume fraction. The twinning volume fraction in the surface grains is much lower than that in the inner grains. To evaluate the contribution of size effect to flow stress, the variation Equation of twinning volume fraction and dislocations in surface and inner grains are quantified. These results were incorporated into a novel mesoscaled constitutive model that includes lattice friction and size-dependent grain boundaries, dislocations and twinning strengthening. The reduction of flow stress in relation to t/d is correctly predicted by the novel model, which also agrees with the experimental results. This study deepens the understanding of deformation mechanism of pure titanium thin sheets in microforming and provides numerical model for accurate forming.

Revealing Mechanism of Ductility Improvement of Titanium Thin Sheet under Normal Stress at Mesoscale from Perspective of Microstructure Evolution

Microstructure Evolution and Constitutive Modeling for Mesoscaled Tension of Pure Titanium Thin Sheet

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Achieving Enhanced Tensile Strength-Ductility Synergy Through Phase Modulation in Additively Manufactured Titanium Alloys

Numerical Modeling and Experimental Study of Microstamping Process for Fabricating Microchannels Using Thin Sheets of Titanium

Ductile-to-Brittle Fracture Size Effect of Titanium Sheets in Micro/Meso-Scale Plastic Deformation

Crystal Plasticity-Based Analysis and Modelling of Grain Size and Strain Path Dependent Micro-Scaled Deformation Mechanisms of Ultra-Thin Sheet Metals

Microstructure Evolution, Mechanical Properties and Strengthening Mechanism of Titanium Matrix Composite Sheets

Modelling of ultra-thin steel sheet in two-stage tensile deformation considering strain path change and grain size effect and application in multi-stage microforming

Constitutive Model and Microstructure Evolution of Ti65 Titanium Alloy

Analysing the Interaction between Microscopic Deformation, Microstructure and Void Evolution of Near-α Titanium Alloys during Non-Superplastic Hot Deformation by an Integrated Crystal Plasticity Finite Element Model

Study on Microstructure Evolution, Mechanical Properties and Deformation Mechanism of Ti-6Al-4V Alloy by Hydraulic Tension On-Line Warm Rolling

Numerical Investigations on the Influence of Superimposed Double-Sided Pressure on the Formability of Biaxially Stretched Aa6111-T4 Sheet Metal

Comparative study of the strain and strain rate hardening mechanisms and its workability during hot deformation of TC4 titanium alloys

The Microstructures and Deformation Mechanism of Hetero-Structured Pure Ti under High Strain Rates

Superposing tensile stresses into single point incremental forming to affect martensitic transformation of SS304

Coupled Cellular Automata-Crystal Plasticity Modeling of Microstructure-Sensitive Damage and Fracture Behaviors in Deformation of Α-Titanium Sheets Affected by Grain Size

Hot deformation behavior and microstructure evolution of TC11 dual-phase titanium alloy

Superplastic Deformation Behavior of 2 mm Ti60 Rolled Sheet in Air Environment

Modeling of Flow Stress Size Effect Based on Variation of Dislocation Substructure in Micro-Tension of Pure Nickel

Hybrid forming process combining electromagnetic and quasi-static forming of ultra-thin titanium sheets: Formability and mechanism