Abstract:The mechanical qualities of natural fiber (NF) -based polymer composites are superior, making them advantageous and these composites are environmentally beneficial. The current investigation involved the fabrication of hybrid composites using Calotropis gigantea (CGF) and Abaca Fiber (AF) as reinforcements in epoxy matrix. The hand layup technique was employed for the fabricating process. Subsequently, the composites were investigated and analysed for their water absorption rate, tribological performance, and mechanical properties. This study aims to uncover a noteworthy combination of NF reinforced polymer composites that can be utilized in commercial Engineering applications. The mechanical properties were examined by measuring their hardness, impact resistance, flexural strength (FS), Compressive strength (CS), and tensile strength (TS). Furthermore, the broken surfaces of tensile sample were inspected utilizing a scanning electron microscope. Composite specimens were immensed in distilled water and their water penetration percentages were measured to ascertain their water absorption (WA) properties. The tribological performance was analysed utilizing a pin-on-disc equipment to assess the specific wear rate and coefficient of friction. The outcomes demonstrated that the hybrid composites surpassed the single-fiber composites in all variations. Sample G exhibited superior properties in all combinations, with a TS of 36.19 MPa and tensile modulus of 328.95 MPa. Additionally, it shows that higher flexural strength of 43.85 MPa and flexural modulus values of 350.84 MPa. Furthermore, it demonstrated higher Compressive strength of 94.45 MPa and modulus values of 576.93 MPa. Moreover, it exhibited a higher impact value of 53.88 kJ/m 2 and higher hardness value of 44.07 HV. This material is well-suited for non-structural uses in electronics and electrical insulating boards and components, as the results show that a combination of CGF and AF fibers with an epoxy matrix improves mechanical qualities.

Influence of Ceiba pentandra fibre orientation on mechanical properties of biocomposites—a rudimentary approach

Effects of fiber type, content, orientation, and surface treatments on the mechanical properties of PAFRP composite

Influence of optimal alkali treated Areca catechu L. peduncle fiber for light weight polymer composites applications

Effect on mechanical properties of CFRP composites in different fiber orientations

Experimental and validation of the mechanical characteristics of bio based hybrid composites

Investigation on the mechanical, water absorption, and tribological performance of calotropis gigantea and abaca fiber reinforced epoxy composites

Influence of fibre direction on the mechanical properties and artificial intelligence-based performance prediction of hybrid abaca-jute amino composites

A comprehensive review on the mechanical, physical, and thermal properties of abaca fibre for their introduction into structural polymer composites

Influence of stacking sequence on mechanical properties of areca-kenaf fiber- reinforced polymer hybrid composite

Effect of chemical treatments of fibre surface on mechanical properties and wear rate of Beerakaya (Luffa acutangula) reinforced epoxy polymer composites

Effect of surface treatment of natural reinforcement on thermal and mechanical properties of vinyl ester/polyurethane interpenetrating polymer network-based biocomposites

Effect of kapok seed powder on mechanical and water intake properties of untreated kenaf fiber composites

Deciphering the pathways for deployment of different architecture of chemically treated and untreated fibers in polymeric materials for performance enhancement

Determination of mechanical properties of okra, sisal fibre and polyester based hybrid composite

Effect of fiber layer formation on mechanical and wear properties of natural fiber filled epoxy hybrid composites

Evaluation of Mechanical and Water Absorption Behavior of Natural Fiber-Reinforced Hybrid Biocomposites

Exploring biofiber properties and their influence on biocomposite tensile properties

Study on the mechanical properties of alkali treated screw pine root fiber reinforced in epoxy matrix composite material

The Effect of Customized Woven and Stacked Layer Orientation on Tensile and Flexural Properties of Woven Kenaf Fibre Reinforced Epoxy Composites

Comparative Analysis of Mechanical and Morphological Properties of Cordenka and Ramie Fiber-Reinforced Polypropylene Composites

PHYSICAL, MECHANICAL, AND MORPHOLOGICAL CHARCTERISTICS OF KAPOK (CEIBA PENTANDRA) TREE BARK AND EPOXY COMPOSITE WITH COATING (AESO) TREATMENT