Abstract:Carbon fiber reinforced polymer (CFRP) composites are commonly used for reflectors of artificial satellites operating in low earth orbit (LEO). The decay of the modulus of the CFRP composite varies under different thermal cycling environments, which can lead to a reduction in the accuracy of the reflector panels, affecting the transmission of signals. This paper investigates the impact of different thermal cycling conditions on the mechanical behavior of carbon fiber/epoxy laminated composites experimentally. Three kinds of thermal cycling conditions involving continuous temperature changes are employed to explore the influence of temperature range on the residual tensile and in-plane shear moduli of the laminates. Test results indicate that the upper temperature limit and the temperature span of the thermal cycling conditions jointly affect the mechanical properties of CFRP composite laminates, but the responses of the residual tensile and in-plane shear moduli are different under the variation of each temperature parameter alone. The residual tensile and in-plane shear moduli of the laminates under thermal cycling decrease with an expansion of the temperature span having the same upper limit. If the temperature span remains constant, an increase in the upper temperature limit leads to an increase in the residual tensile modulus, but a decrease in the residual in-plane shear modulus. The main damages causing the decay of residual tensile and in-plane shear moduli of unidirectional laminates were investigated by scanning electron microscopy (SEM) technology. Observations of the microscopic fracture of the material show that the post-curing reaction factor predominantly influences the residual tensile modulus of unidirectional laminates, while the fiber/matrix interface damage factor dominates the residual in-plane shear modulus of the unidirectional laminates. Furthermore, an increase in the fiber tensile modulus decreases both residual tensile and residual in-plane shear moduli. Notably, the residual in-plane shear modulus exhibits greater sensitivity to thermal cycling compared to the residual tensile modulus. The findings reported in this paper would provide valuable insights and guidance for the design and application of carbon fiber/epoxy composites subjected to thermal cycling conditions.

Influences of Cryo-Thermal Cycling on the Tensile Properties of Short Carbon Fiber/polyetherimide Composites

Influence of Cryogenic Thermal Cycling Treatment on the Thermophysical Properties of Carbon/carbon Composites Between Room Temperature and 1900 °C

Mechanical Properties and Internal Microdefects Evolution of Carbon Fiber Reinforced Polymer Composites: Cryogenic Temperature and Thermocycling Effects

Effects of Cryo-Thermal Cycling on Interlaminar Shear Strength and Thermal Expansion Coefficient of Carbon Fiber/graphene Oxide-Modified Epoxy Composites

Experimental and multiscale modeling investigations of cryo-thermal cycling effects on the mechanical behaviors of carbon fiber reinforced epoxy composites

Aging effects of carbon fiber/bismaleimide composite subjected to thermal cycling

Raman mapping microspectroscopy of the effects of cryogenic cycling on the interfacial micromechanics of carbon fiber-reinforced polyimide composites

On the mechanical behavior of carbon fiber/epoxy laminates exposed in thermal cycling environments

Tensile and Interfacial Properties of Dry-Jet Wet-Spun and Wet-Spun Polyacrylonitrile-Based Carbon Fibers at Cryogenic Condition

Effect of Cryogenic Thermal Cycling on SiC-modified C/C Composites

Effects of temperature and fiber orientation on the tensile behavior of short carbon fiber reinforced PEEK composites

Thermal Shock Behavior of Twill Woven Carbon Fiber Reinforced Polymer Composites

Effect of vacuum thermal cyclic exposures on the carbon/carbon composites

On the Effects of Temperature on Tensile Behavior of Carbon Fiber Reinforced Epoxy Laminates

Effects of Temperature on Tensile Strength of Carbon Fiber and Carbon/Epoxy Composite Sheets

Improving Mechanical Performances at Room and Elevated Temperatures of 3D Printed Polyether-Ether-ketone Composites by Combining Optimal Short Carbon Fiber Content and Annealing Treatment

Synergistic effects of extreme temperature and prebending on CF/PEKK composite flexural characteristics

Exploration of Effect of Thermal Cycling Treatment on Mechanical and Tribological Performance of Polyimide Composites

Cryogenic mechanical properties of unidirectional carbon fiber reinforced epoxy composite

Interface properties of carbon fiber reinforced cyanate/epoxy resin composites at cryogenic temperature

Property enhancement of polymer-based composites at cryogenic environment by using tailored carbon nanotubes