Abstract:Carbon fiber reinforced polymer (CFRP) composites are commonly used for reflectors of artificial satellites operating in low earth orbit (LEO). The decay of the modulus of the CFRP composite varies under different thermal cycling environments, which can lead to a reduction in the accuracy of the reflector panels, affecting the transmission of signals. This paper investigates the impact of different thermal cycling conditions on the mechanical behavior of carbon fiber/epoxy laminated composites experimentally. Three kinds of thermal cycling conditions involving continuous temperature changes are employed to explore the influence of temperature range on the residual tensile and in-plane shear moduli of the laminates. Test results indicate that the upper temperature limit and the temperature span of the thermal cycling conditions jointly affect the mechanical properties of CFRP composite laminates, but the responses of the residual tensile and in-plane shear moduli are different under the variation of each temperature parameter alone. The residual tensile and in-plane shear moduli of the laminates under thermal cycling decrease with an expansion of the temperature span having the same upper limit. If the temperature span remains constant, an increase in the upper temperature limit leads to an increase in the residual tensile modulus, but a decrease in the residual in-plane shear modulus. The main damages causing the decay of residual tensile and in-plane shear moduli of unidirectional laminates were investigated by scanning electron microscopy (SEM) technology. Observations of the microscopic fracture of the material show that the post-curing reaction factor predominantly influences the residual tensile modulus of unidirectional laminates, while the fiber/matrix interface damage factor dominates the residual in-plane shear modulus of the unidirectional laminates. Furthermore, an increase in the fiber tensile modulus decreases both residual tensile and residual in-plane shear moduli. Notably, the residual in-plane shear modulus exhibits greater sensitivity to thermal cycling compared to the residual tensile modulus. The findings reported in this paper would provide valuable insights and guidance for the design and application of carbon fiber/epoxy composites subjected to thermal cycling conditions.

Influence of Cryogenic Thermal Cycling Treatment on the Thermophysical Properties of Carbon/carbon Composites Between Room Temperature and 1900 °C

Effects of Cryo-Thermal Cycling on Interlaminar Shear Strength and Thermal Expansion Coefficient of Carbon Fiber/graphene Oxide-Modified Epoxy Composites

Experimental and multiscale modeling investigations of cryo-thermal cycling effects on the mechanical behaviors of carbon fiber reinforced epoxy composites

Raman mapping microspectroscopy of the effects of cryogenic cycling on the interfacial micromechanics of carbon fiber-reinforced polyimide composites

Thermal Shock Behavior of Twill Woven Carbon Fiber Reinforced Polymer Composites

Mechanism of Matrix Influencing the Cryogenic Mechanical Property of Carbon Fibre Reinforced Epoxy Resin Composite

The Influence of Cryogenic Treatment on the Microstructure and Mechanical Characteristics of Aluminum Silicon Carbide Matrix Composites

Influence of Cryogenic Treatment on Thermal Expansion Properties of SiCp/Al Composites

Interface properties of carbon fiber reinforced cyanate/epoxy resin composites at cryogenic temperature

Effect of thermal cycling on the mechanical properties of Cf/Al composites

Effect of Thermal Cycling on the Mechanical Properties of Carbon Nanotubes Reinforced Copper Matrix Nanolaminated Composites

Effect of Vacuum Thermo-Cycling on Physical Properties of Unidirectional M40J/AG-80 Composites

EFFECT OF HEAT TREATMENT TEMPERATURE ON THE TRIBOLOGICAL PROPERTIES OF CARBON FIBER REINFORCED CARBON COMPOSITES

Effect of thermal-cooling cycle treatment on thermal expansion behavior of particulate reinforced aluminum matrix composites

On the mechanical behavior of carbon fiber/epoxy laminates exposed in thermal cycling environments

Effect of heat treatment on the tribological behavior of 2D carbon/carbon composites

Effects of Cryogenic Treatment on Mechanical Properties of SiCp/A356 Composites

Tensile and Interfacial Properties of Dry-Jet Wet-Spun and Wet-Spun Polyacrylonitrile-Based Carbon Fibers at Cryogenic Condition

Thermal cycling of silicon carbide whisker reinforced ZL101A composite

Modification of Tensile, Wear and Interfacial Properties of Kevlar Fibers under Cryogenic Treatment

Experimental Study of High-Temperature Tensile Mechanical Properties of 3D Needled C/C–SiC Composites