Abstract:The need for safe storage systems with a high energy density has increased the interest in high-voltage solid-state Li-metal batteries (LMBs). Solid-state electrolytes, as a key material for LMBs, must be stable against both high-voltage cathodes and Li anodes. However, the weak interfacial contact between the electrolytes and electrodes poses challenges in the practical applications of LMBs. In this study, a double-layered solid composite electrolyte (DLSCE) was synthesized by introducing an antioxidative poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-10 wt % Li1.3Al0.3Ti1.7(PO4)3 (LATP) to the cathode interface, whereas a lithium-friendly poly(oxyethylene) (PEO)-5 wt % LATP was made to come into contact with Li metal. Owing to the heterogeneous double-layered structure of the DLSCE, a high ionic transfer number (0.43), high ionic conductivity (1.49 × 10–4 S/cm), and a wide redox window (4.82 V) were obtained at ambient temperature. Moreover, the DLSCE showed excellent Li-metal stability, thereby enabling the Li–Li symmetric cells to stably run for over 600 h at 0.2 mA/cm2 with effective lithium dendrite inhibition. When paired with a high-voltage LiNi1/3Co1/3Mn1/3O2 cathode, the Li/DLSCE/NCM111 cell exhibited excellent electrochemical performance: long-term cyclability with 85% capacity retention could be conducted at 0.2C after 100 cycles corresponding to 100% Coulombic efficiencies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22532?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22532</a>.EIS and FTIR spectra; SEM image and size distribution of pristine; the TG plot and DSC profiles; LSV curves and the schematic of the intermolecular-hydrogen-binding effect between PVDF-HFP and PEO membranes; voltage profiles of Li symmetrical cells; the lithium-metal surface before battery cycle and the cross-sectional images of the NCM111/DLSCE/Li cell after cycling; cycling performance of the NCM111/PVDF-HFP-10 wt % LATP/Li battery; and EIS of NCM111/Li cells before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22532/suppl_file/am0c22532_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Rational Design of a Double-Layer Janus Solid Electrolyte for High Voltage Lithium Metal Battery

Rational Design of a Cross-Linked Composite Solid Electrolyte for Li-Metal Batteries

Rational Design of a Laminated Dual-Polymer/Polymer–Ceramic Composite Electrolyte for High-Voltage All-Solid-State Lithium Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

A Quasi‐Double‐Layer Solid Electrolyte with Adjustable Interphases Enabling High‐Voltage Solid‐State Batteries

Unique double-layer solid electrolyte interphase formed with fluorinated ether-based electrolytes for high-voltage lithium metal batteries

Double-layer Solid-State Electrolyte Enables Compatible Interfaces for High-Performance Lithium Metal Batteries

Design of multifunctional interfaces on ceramic solid electrolytes for high-performance lithium-air batteries

A Janus-faced, perovskite nanofiber framework reinforced composite electrolyte for high-voltage solid lithium-metal batteries

Engineering a High-Voltage Durable Cathode/Electrolyte Interface for All-Solid-State Lithium Metal Batteries via In Situ Electropolymerization

High-stability double-layer polymer–inorganic composite electrolyte fabricated through ultraviolet curing process for solid-state lithium metal batteries

Multilayer structure solid-state electrolyte composite membranes for long-life quasi-solid-state battery

A high ionic conductive PDOL/LAGP composite solid electrolyte film for Interfacial Stable solid-state lithium batteries

Artificial Interlayer and Special Electrode Structure Design in a Solid-State Battery to Homogenize Li-Ion Transport

A Deformable Dual-Layer Interphase for High-Performance Li10GeP2S12-based Solid-State Li Metal Batteries

Tailoring Electric Double Layer by Cation Specific Adsorption for High‐voltage Quasi‐solid‐state Lithium Metal Batteries

Adjusting Interfacial Reactions for Achieving Highly Stable Operation in Lithium Metal Batteries

Layer-Structured Composite Solid-State Electrolyte with a Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 -Coated Separator for High-Voltage Lithium Metal Batteries by In Situ Polymerization

Asymmetric double-layer composite electrolyte with enhanced ionic conductivity and interface stability for all-solid-state lithium metal batteries