Bridging the Macroworld to Micro/Nanomaterials: Multidisciplinary Science at Tsinghua University
Qiang Zhang,Xun Wang,Yucong Lin
DOI: https://doi.org/10.1002/smll.202000856
IF: 13.3
2020-01-01
Small
Abstract:“There's Plenty of Room at the Bottom.” Since Feynman's 1959 talk, the sustainable growth of nanoscience and nanotechnology not only creates new concepts and theories to understand their nature, but also produces abundant micro/nanomaterials and vast applications for the current microworld in our daily lives. The emerging micro/nanomaterials render unprecedented properties and multiple functions for practical applications in the area of electronics, communications and the Internet of Things, energy storage, chemical and fuel production, healthcare, drug delivery, and so on. To fully boost the properties of advanced materials for the macroworld, multidisciplinary physical science, especially the fundamental physics and chemistry of materials, as well as the related applied science in the field of chemical engineering, mechanical engineering, civil engineering, environment, aerospace, electrical engineering and information technology are highly requested. This Special Issue guest edited by Prof. Qiang Zhang, Xun Wang, and Yuanhua Lin provides a family of high-impact publications in the fields of micro/nanoscale materials research at Tsinghua University. Tsinghua University was established in 1911. As one of China's most prestigious and influential universities, Tsinghua is committed to pursue education and research at the highest level of excellence. To meet the global challenges and emerging technologies, the innovative solutions based on micro/nanomaterials with multiple functions and practical applications are strongly considered. This Special Issue in Small affords the critical viewpoints in promoting the multidisciplinary research contributed by Tsinghua experts in materials science, chemistry, chemical engineering, physics, environmental science, mechanical engineering, and energy sciences. The topics presented herein are valuable to a spectrum of international research groups in multidisciplinary macro/nanomaterial research. The controllable fabrication of advanced materials is the first step in exploring their properties and practical applications. Two-dimensional (2D) materials are the most attractive platform for demonstrating the feasibility of precise synthesis and characterization of nanomaterials. For instance, Hui-Ming Cheng, Bi-Lu Liu, and co-workers describe a dual additive assisted chemical vapor deposition for the precise growth of doped 2D materials in article number 1903181; while in article number 1902779, Xu-Ming Xie and co-workers review the coordination-driven assembly of hybrid nanostructures based on 2D building blocks. In article number 1904271, Yu-Lun Chueh and co-workers review hybridizing plasmonic materials with 2D transition metal dichalcogenides. Chunlei Wan and co-workers described an emerging solution-based strategy to fabricate a large-area foil of hybrid sulfide/organic superlattice with very high electromagnetic interference (article number 1901901). The hybridization of low-dimensional building blocks always leads to novel or even unexpected properties. In article number 1902844, Jianbin Luo, Tianbao Ma, and co-workers find that the interlayer contact conductance between bilayer graphene strongly depends on the twist angle, which originates from the coupling–decoupling transitions. Ming Ma, Quanshui Zheng, and co-workers review the structural superlubricity of various kinds of micro/nanomaterials such as 2D materials, metals, and compounds in article number 1903018. In article number 1902842, Xiaoyan Li and co-workers illustrate the fabrication and mechanics of micro-/nanolattices with an emphasis on mechanistic insights and origins of the compressive Young's modulus, strength, energy absorption, recoverability, and tensile behavior. Such advanced engineering materials are highly attractive for lightweight and stiff industrial structures. Kai Wang, Guangsheng Luo, and co-workers review the continuous synthesis of nanocrystals via flow chemistry in article number 1902828. The flow chemistry processes in microreactors are of great potential for a smooth transfer from lab research to industrial production. Not only mechanical properties, but also electronic properties of nanomaterials are strongly considered. In article number 1902820, Wangyang Fu and co-workers present the recent progress of nanoelectronic biochemical sensors based on graphene, which have potential applications ranging from environmental monitoring and food safety, to healthcare and medical diagnosis. In article number 1901124, Tian-Ling Ren and co-workers review the typical graphene-based materials, transition metal dichalcogenides, and transition metal carbides or carbonitrides for wearable electronics, aiming toward wearable electronics for human healthcare monitoring and medical diagnosis. Energy can drive devices into a working state. How to efficiently convert and store energy is therefore strongly considered. Carbon nanotube research at Tsinghua has a history of more than 25 years. Herein, Shoushan Fan, Jiaping Wang, and co-workers describe highly oriented, superaligned carbon nanotube arrays with various forms (e.g., unidirectional films, buckypapers, and aerogels) for composite electrodes, current collectors, interlayers, and flexible full lithium ion batteries (article number 1902719). Yuanhua Lin and co-workers describe polymer-based composite solid electrolytes derived from the incorporation of inorganic fillers into polymer solid electrolytes for all-solid-state lithium batteries in article number 1902813. The recent achievements in understanding lithium storage performance of conversion-based anodes and alloying-based anodes are reviewed by Shengming Xu and co-workers in article number 1902841. The material design strategies for sodium-ion capacitors are summarized by Ruitao Lv and co-workers in article number 1902843. Wei Lv and co-workers describe the recent advances of functional carbon nanomaterials for sodium ion batteries, in which heteroatom doping enhances the electrochemical reactivity and the grafting of functional groups promotes both the diffusion-controlled bulk process and surface-confined capacitive process in article number 1902603. The energy harvested from renewable resources is highly important for meeting the global challenges for a sustainable life. In article number 1902579, Hong Lin and co-workers review metal oxide electron transport layers for efficient organometallic mixed halide perovskite solar cells. Inorganic halide perovskite quantum dots are summarized by Da Chen, Jinghong Li, and co-workers in article number 1903398 for a wide range of practical applications in photoelectrochemistry, ranging from photocatalytic degradation, photocatalytic CO2 reduction and photoelectrochemical sensing to photovoltaic devices. In article number 1902827, Liu Wang, Lan Yin, and co-workers review material strategies and architectural design of power devices and energy transfer devices. Great efforts have been devoted into the exploration of energy catalysis that is clean and of minimum environmental impact. In article number 1901979, Fei Wei and co-workers review the application of graph theory to transport phenomena in zeolites, which can build a bridge between microscopic quantum physics and macroscopic catalyst engineering. Xiaoyuan Zhang, Qiang Zhang, and co-workers describe a surface nitrogen-enriched carbon coaxial nanocable as an oxygen reduction reaction electrocatalyst in microbial fuel cells (article number 1905240). Xun Wang and co-workers describe cobalt phosphides confined in porous P-doped carbon materials for all-pH hydrogen evolution and overall water splitting in article number 1900550. Mu-Jeng Cheng, Qi Lu, and co-workers illustrate the current frontiers in electrocatalyst design of electrochemical production of hydrogen peroxide in article number 1902845, while Jingkun Jiang and co-workers report Co nanoparticles in nitrogen-doped carbon for in situ monitoring of hydrogen peroxide in article number 1902860. The nanomaterials are full of potential for emerging practical applications. In article number 1902301, Weizhong Qian and co-workers describe the applications of carbon nanotube/graphene-based nanomaterials for wastewater treatment in article number 1902301; Jun Ge and co-workers summarize the design of enzyme–metal hybrid catalysts and their applications in chemoenzymatic cascade reactions in article number 1902751; Qionglin Liang and co-workers review hydrogel materials with perfusable microchannels for building engineered vascularized tissues in article number 1902838. The multidisciplinary innovation in micro/nanomaterials is a multiscale solution to bridge the small-scale science to macro-engineering. To close, we would like to express our sincere thanks to the editorial team of Small, in particular, Dr. Lulu Ma and Dr. Lisa Smith. We would also like to thank all the authors and reviewers for their great contribution and for making this high-quality issue possible. Qiang Zhang received his bachelor and Ph.D. degree from Tsinghua University in 2004 and 2009, respectively. After a stay at Case Western Reserve University, USA, and Fritz Haber Institute of the Max Planck Society, Germany, he was appointed a faculty member in Tsinghua University in 2011. His current research interests are advanced energy materials, including dendrite-free lithium metal anodes, lithium sulfur batteries, and electrocatalysis, especially the structure design and full demonstration of advanced energy materials in working devices. Xun Wang received his Ph.D. degree from the Department of Chemistry, Tsinghua University in 2004. He then joined the faculty of the Department of Chemistry, Tsinghua University in 2004, and was promoted to associate professor and full professor in 2005 and 2007, respectively. He is currently the chairman of the Department of Chemistry (2014–present), Tsinghua University. His research interests include the synthetic methodology, formation mechanism, and properties of sub-1 nm ultrathin nanocrystals. Yuan-Hua Lin received his Ph.D. in the Department of Materials Science & Engineering (MSE) from Tsinghua University in 2001, and then joined the faculty of the Department of MSE. He joined the University of Tokyo as a postdoc (2004–2006). Now, he is the dean of the School of MSE of Tsinghua University. His research interests are functional oxide-based ceramics and thin films, including high κ ceramic films and nanocomposites for high energy density capacitor applications, and high-temperature oxides thermoelectric materials and devices for energy conversion.