Abstract:Background The convectional strain-based algorithm has been widely utilized in clinical practice. It can only provide the information of relative information of tissue stiffness. However, the exact information of tissue stiffness should be valuable for clinical diagnosis and treatment. Methods In this study we propose a reconstruction strategy to recover the mechanical properties of the tissue. After the discrepancies between the biomechanical model and data are modeled as the process noise, and the biomechanical model constraint is transformed into a state space representation the reconstruction of elasticity can be accomplished through one filtering identification process, which is to recursively estimate the material properties and kinematic functions from ultrasound data according to the minimum mean square error (MMSE) criteria. In the implementation of this model-based algorithm, the linear isotropic elasticity is adopted as the biomechanical constraint. The estimation of kinematic functions (i.e., the full displacement and velocity field), and the distribution of Young’s modulus are computed simultaneously through an extended Kalman filter (EKF). Results In the following experiments the accuracy and robustness of this filtering framework is first evaluated on synthetic data in controlled conditions, and the performance of this framework is then evaluated in the real data collected from elastography phantom and patients using the ultrasound system. Quantitative analysis verifies that strain fields estimated by our filtering strategy are more closer to the ground truth. The distribution of Young’s modulus is also well estimated. Further, the effects of measurement noise and process noise have been investigated as well. Conclusions The advantage of this model-based algorithm over the conventional strain-based algorithm is its potential of providing the distribution of elasticity under a proper biomechanical model constraint. We address the model-data discrepancy and measurement noise by introducing process noise and measurement noise in our framework, and then the absolute values of Young’s modulus are estimated through the EFK in the MMSE sense. However, the initial conditions, and the mesh strategy will affect the performance, i.e., the convergence rate, and computational cost, etc.

A FORCE SENSOR-LESS METHOD FOR IDENTIFYING THE YOUNG'S MODULUS OF SOFT TISSUE

Identification of Young's Modulus and Equivalent Spring Constraint Boundary Conditions of the Soft Tissue with Locally Observed Displacements for Endoscopic Liver Surgery.

A FEM-based Direct Method for Identification of Young’s Modulus and Boundary Conditions in Three-Dimensional Linear Elasticity from Local Observation

A Novel Objective Function for the Inverse Problem of Simultaneous Identification of Unknown Youngs Modulus and Boundary Conditions with Noisy and Partial Observation

Robust Filtering Strategies For Soft Tissue Young'S Modulus Characterization

Haptically Quantifying Young's Modulus of Soft Materials Using a Self‐Locked Stretchable Strain Sensor

A Non-invasive Method to Estimate the Stress-Strain Curve of Soft Tissue Using Ultrasound Elastography

Young's Modulus Measurement of Soft Tissue Based on Mean Scatter Spacing in Elasticity Imaging

Assessing the Mechanical Properties of Anisotropic Soft Tissues Using Guided Wave Elastography: Inverse Method and Numerical Experiments

Haptically Quantifying Young's Modulus of Soft Materials Using a Self‐Locked Stretchable Strain Sensor (Adv. Mater. 25/2022)

Reconstruction of elasticity: a stochastic model-based approach in ultrasound elastography

Noninvasive Measurement of Local Stress Inside Soft Materials with Programmed Shear Waves

A Direct Method to Identify Young’s Moduli and Boundary Conditions of the Heterogeneous Material

Development of a Method for Tissue Elasticity Imaging Using Tagged Magnetic Resonance Imaging

Design, Prototyping, and Characterization of a Micro-Force Sensor Intended for Tissue Assessment in Confined Spaces

A Multiple-Data-based Direct Method for Inverse Problem in Three-Dimensional Linear Elasticity

A Novel Young's Modulus Reconstruction Method Based on a Modified Plane-Strain Model

A Multi-Sphere Indentation Method to Determine Young's Modulus of Soft Polymeric Materials Based on the Johnson–Kendall–Roberts Contact Model

Non-destructive mapping of stress, strain and stiffness of thin elastically deformed materials

A direct method to identify Young's moduli and boundary conditions of the heterogeneous material

In-vivo measurement of the human soft tissues constitutive laws. Applications to Computer Aided Surgery