Abstract:To overcome the difficulty of gripping soft biological materials for tensile test, a simple inexpensive cryogenic holder was developed which allows rapid (3 min) preparation of samples. It is made of 6 parts, built in a bakelite cloth, which is an excellent thermal isolant, and is used with rectangular (8x10(-2)x10(-2)x10(-2)m) samples. The holder with the sample inside is completely immersed in liquid nitrogen for 50 s. This duration allows the freezing of the sample ends on a 10(-2)m length and gives a very flat freezing surface throughout the sample cross section. The 6x10(-2)m central part of the sample remained at ambient temperature. Two parts of the holder help maintain the sample until its ends are vertically gripped in the tensile machine thus avoiding any sample deformation during this step. No pressure was applied on the frozen part of the sample by grips of the tensile machine and this avoids breaks in this region. The sample is fixed by adhesion forces (>1 kN) between its frozen parts and 2 pieces of the holder. The procedure has been successfully tested with bovine and salmon muscle samples and results show tensile breaks randomly distributed in the unfrozen region of the samples. Particular attention has been paid to obtain a very flat freezing surface so that the axial strain is equal throughout the sample and therefore any strain-related mechanical parameters can be accurately determined. The dimensions of the holder can be easily modified to fit other sample geometries and can be used with other biological materials.

One sample tubes were stored frozen and chilled storage means

A PROPOSED DESIGN FOR THE CRYOPRESERVATION OF INTACT AND ADHERENT HUMAN EMBRYONIC STEM CELL COLONIES

Preservation device of DNA samples

One-PCR-tube approach for in situ DNA isolation and detection.

A simple cryo-holder facilitates specimen observation under a conventional scanning electron microscope

A simple cryogenic holder for tensile testing of soft biological tissues

A Smart Box with Adjustable Cooling Rate for Cryopreservation.

Note: An isobaric sample transfer apparatus for deep-sea pressurized fluid sample

Development and Performance Test of a Cryoprobe with Heat Transfer Enhancement Configuration

Rapid Freezing Using Atomized Liquid Nitrogen Spray Followed by Frozen Storage below Glass Transition Temperature for Cordyceps Sinensis Preservation: Quality Attributes and Storage Stability

Using A Novel Supramolecular Gel Cryopreservation System In Microchannel To Minimize The Cell Injury

Integrating Micro- or Nanoscale Encapsulation Technology with Vitreous Cryopreservation: A New Strategy to Improve Biopreservation.

Freezing Curve-Based Monitoring to Quickly Evaluate the Viability of Biological Materials Subject to Freezing or Thermal Injury

SMALL TISSUE DRYERS WITH HIGH CAPACITY FOR RAPID FREEZE-DRYING

Biological Chip Technology to Quickly Batch Select Optimum Cryopreservation Procedure

Pinched Tube Method for Gas Sample Transfers

Rare sperm DPV refrigeration system of high -efficient safe people

An Ultra-High-Vacuum Rotating Sample Manipulator with Cryogenic Cooling

Ultrafast Axial Freezing in a Liquid-Filled Capillary Tube

Investigation on the Thermal Performance of a Novel Microchannel-Aided Device for Vitrification of Cells/tissues

The Unusual Properties Of Polytetrafluoroethylene Enable Massive-Volume Vitrification Of Stem Cells With Low-Concentration Cryoprotectants