Abstract:The solid-state sensible heat storage method is cost-effective, technically simple, and works well across wide temperatures. Using return fines (RFs) as the heat storage medium (HSM) can ease problems like RFs in excess and high energy consumption in the sintering process. This article first characterizes the thermal properties of RFs. Results show a specific heat capacity of 0.67-0.97 kJ/(kg & sdot;degrees C) within 20-380 degrees C, with stable thermal properties from 100 to 1000 degrees C. Then, the heat transfer performance of RFs and heat transfer oil (HTO) in a shell and tube heat exchanger is experimentally investigated. H-shaped fins are added to enhance the heat transfer. Stacking solid particles on the shell side can avoid direct contact between the HSM and HTO, the tiny size limitations of HSM particles, and cracking problems caused by thermal expansion. The thermal energy storage (TES) unit operates within 170-270 degrees C. Effects of different flow rates (30, 20, 10 L/min) and charging/discharging temperatures (300/160, 290/150, 280/140 degrees C) on system performance are explored. Increasing the HTO flow rate and charging temperature and lowering the discharging temperature can reduce charging/discharging time and enhance average power. Cycle efficiencies for flow rates of 30, 20, and 10 L/min are 86.9%, 85.2%, and 79.5% respectively. The 30 L/min working condition shows the best performance. Remarkably, system performance improvements are relatively limited compared to the 20 L/min setting. Regarding charging/ discharging temperatures of 300/160, 290/150, and 280/140 degrees C, cycle efficiencies stand at 73.3%, 85.2%, and 70.6%, respectively, with the 290/150 degrees C setting displaying the most favorable characteristics, including the shortest total charge and discharge time of 59.3 min and the highest cycle efficiency. Efforts to enhance the system's insulation and maintain a substantial temperature differential between HTO and HSM are pivotal in accelerating the charge/discharge process and minimizing heat loss.

Experimental Study of Solid Particles in Thermal Energy Storage Systems for Shell and Tube Heat Exchanger: Effect of Particle Size and Flow Direction

Experimental Study of Thermal Energy Storage System for Solid Particles/ Heat Transfer Oil in Shell and Tube Heat Exchangers with H-shaped Fins

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Effect of fluid direction and reactor structure on heat storage performance of Ca(OH) 2 /CaO based on shell-tube thermochemical energy storage device

Effects of Solid Particle Properties on the Thermal Performance of a Packed-Bed Molten-Salt Thermocline Thermal Storage System

Numerical Study on Shell- And-Tube Moving Packed Bed Heat Exchanger: Effect of Tube Arrangement on the Particle Side

Experimental study on heat storage characteristics of an air-sand moving bed heat exchanger

Experimental investigation of thermal performance in a shell-and-tube phase change thermal energy storage unit with an inner square tube

Enhancing thermal performance in shell-and-tube latent heat thermal energy storage units: An experimental and numerical study of shell geometry effects

Particle-wall heat transfer in narrow-channel bubbling fluidized beds for thermal energy storage

Heat transfer and heat storage characteristics of calcium hydroxide/oxide based on shell-tube thermochemical energy storage device

Thermal Characteristics of a Small-Scale Medium- and High-Temperature Latent Heat Storage System at Different Inlet Flow Rates and Their Influencing Factors

Experimental and Numerical Investigation on Enhancing Heat Transfer Performance of a Phase Change Thermal Storage Tank

An Industrial Experiemental Study on Heat Discharge Performance of Cylindrical Phase-change Thermal Energy Storage

Experimental evaluation of shell geometry impact on thermal and exergy performance in helical coiled tube heat exchanger with phase change material

Thermal Assessment on Solid-Liquid Energy Storage Tube Packed with Non-Uniform Angled Fins

Study on the Heat Transfer Characteristics of a Shell-and-tube Phase Change Energy Storage Heat Exchanger

Heat transfer simulation of heat storage unit with nanoparticles and fins through a heat exchanger

Thermal and Fluid Characteristics of a Latent Heat Thermal Energy Storage Unit

Experimental Study of a Silica Sand Sensible Heat Storage System Enhanced by Fins