Abstract:In the face of the problem of waste disposal in the demolition of concrete structures, a composite wall composed of recycled concrete bricks and fly ash blocks was proposed, and based on the previous thermal performance research, its axial compression performance were further studied. Four types of walls were designed and constructed: (1) clay brick masonry (CBM), (2) recycled concrete brick masonry (RBM), (3) bilateral clay bricks masonry with coal-ash blocks sandwich insulation wall (CFCM), and (4) bilateral recycled concrete bricks masonry with coal-ash blocks sandwich insulation wall (RFRM). The test results showed that recycled concrete brick masonry exhibited a higher bearing capacity than clay brick masonry. The ultimate load of RBM was 15% higher than that of CBM. Moreover, the ultimate load of CFCM was 21% higher than that of CBM. Following the addition of sandwich coal-ash blocks in RBM, its ultimate load increased by over 42% than that of CBM. Following the addition of coal-ash blocks sandwich in both clay and recycled concrete bricks masonry, both the bearing capacity and strain exhibited improvement, the yielding load and compressive strength of them increased. Thus, it could be concluded that coal-ash blocks improved its bearing capacity. Based on the analysis of the axial compression tests, a theoretical computational model was developed and a computational expression to explain the compressive bearing capacity of a two-sided brick with coal-ash blocks sandwich insulation wall. Comparisons between the test ultimate loads (FT) and the estimated ultimate loads (FE) confirmed the accuracy of the theoretical calculation model for the compressive bearing capacity. Thus, theoretical computational models are highly recommended for the design of two-sided bricks with insulating walls constructed from coal-ash blocks being sandwiched together. This study provides a theoretical basis for the engineering application of recycled concrete brick wall and fly ash block composite wall.

Structure and heat insulation integrated composite brick

Ladleful Enlargement and Thermal Insulation Technology for Ladle

Effect of Control Technology on Properties of Quartz Porous Brick

A Novel Energy-Absorbing Composite Structure with Layers of Basalt Fiber Fabric Constraining Waste Brick Particles and Foam Concrete

Tailoring the Thermal and Mechanical Properties of Lightweight Cement-Based Composites by Macro and Micro Fillers

A comparative analysis of compression bearing capacity in recycled concrete brick walls and composite walls incorporating coal-ash blocks

Experimental study on producing light wall materials with waste brick

Preparation, characteristics and mechanisms of the composite sintered bricks produced from shale, sewage sludge, coal gangue powder and iron ore tailings

Microstructure Evolution and Improved Permeability of Ceramic Waste-Based Bricks

The Use of Urban River Sediments As A Primary Raw Material in the Production of Highly Insulating Brick

Non-clay bricks with high compressive strength made from secondary aluminum dross and waste glass

Mechanical Properties of Composite Mortar for Residential Drick Walls

Fire Protection Design for Composite Lattice Sandwich Structure

Newly Generated Ca-Feldspar during Sintering Processes Enhances the Mechanical Strength of Coal Gangue-Based Insulation Bricks

Using Bayer red mud and calcium fluoride sludge to make co-fired bricks

Experimental study on mechanical and thermal insulation properties of a geopolymer‐based fireproof sandwich panel

Method for preparing industrial solid waste-based baking-free brick by combining composite cementing material with carbonation curing technology

A new heat resistant load bearing system incorporating honeycomb structured cementitious composite investigated via experiments and modelling

Recycling of sewage sludge in clay-free thermal insulation brick: assessment of microstructure, performance, and environment impact

Preparation and Mechanical Behavior of Si3N4 Composite Ceramics with Brick‐and‐mortar Structure

Producing of WCp Reinforced SG lron Composites Firebrick Mould And Its Abrasive Wear Behavior