Abstract:Fluid discrimination is an important technology for reservoir characterization in seismic exploration. Despite many years of studies on this tool, many problems remain unsolved. The conventional pre-stack inversion method is implemented based on three-parameter approximation. Usually, the density information is contained in three-parameter inversion. While for deep reservoirs, the maximum angle of incidence is not enough to invert the density information, and the low signal-to-noise ratio (SNR) of the data makes the inversion unstable. With the unstable pre-stack inversion, there will be more uncertainty in fluid identification. In order to stabilize the inversion and improve the accuracy of fluid identification for deep reservoirs, we present an identification method for deep reservoir fluids based on basis pursuit elastic impedance inversion.According to the theory of porous media, the f-mu two-term AVO approximate equation is derived in terms of Gassmann fluid term (f) and shear modulus (mu). We make a comparison of the reflection coefficients calculated by Zoeppritz equation, f-mu-rho three-term approximation and f-mu two-term approximation. As elastic impedance (EI) inversion is more reliable than AVO/AVA inversion, we derive the two-term elastic impedance equation based on the idea proposed by Connolly. The model constrained basis pursuit inversion is proposed for elastic impedance inversion, which can improve the stability of inversion for elastic impedance. After implementing the inversion for two-angle elastic impedance, we present the fluid factor and shear modulus extraction method by utilizing the two-term elastic impedance equation. We use the well log to confirm the validity of our method. Finally, we apply the method to a real deep reservoir data to identify the fluid saturated in the reservoir.The derived two-parameter equation is close to the Zoeppritz equation when the angle of incidence is less than 20 degrees, and it has almost the same accuracy as f-mu-rho three-term approximation equation. Therefore, the f-mu two-parameter approximation can be used for fluid factor estimation. It is clear that the method of fluid factor and shear modulus extraction is stable and the estimates match well with the real model from the model test. The results of real data application match well with the well data interpretation and the blocky inversion results generated by the model constrained basis pursuit method have a good resolving power to the layers.We simplify the f-mu-rho three-term approximate equation into f-mu two-term approximate equation which is suitable for deep reservoirs. The accuracy of the new approximate equation is almost the same as the f-mu-rho approximate equation. The model constrained basis pursuit inversion method yields the blocky layer which has the advantage in interpretation. The tests on synthetic data and field data show that the estimates are reliable and can be used for fluid discrimination for deep reservoirs.

Frequency Segmented Hybrid Inversion Method for Non-Acoustical Parameters Estimation of Porous Foam Materials

Uncertainty and Sensitivity Analysis of Non-Acoustic Parameters on Acoustic Characteristics Prediction Models for Porous Foam Materials

A Method for Identifying Tortuosity, Viscous Characteristic Length and Thermal Characteristic Length of Kapok Mixed Fiber Porous Materials

Frequency Dependent Elastic Impedance Inversion for Interstratified Dispersive Elastic Parameters

Characterization of rigid open-cell foams using direct ultrasonic simulation

An Extended Transfer Matrix Method for Measuring Acoustical Properties of Porous Materials Beyond the Cut-off Frequency.

Inverse Identification of the Acoustic Porous Parameters of Double-Layered Poroelastic Structures by Acoustic Rigidity Approximation.

In situ acoustic characterization of a locally reacting porous material by means of PU measurement and model fitting

A High-Efficiency Inversion Method for the Material Parameters of an Alberich-Type Sound Absorption Coating Based on a Deep Learning Model

Joint Inversion of Frequency Components of PP- and PSV-Wave Amplitudes for Attenuation Factors Using Second-Order Derivatives of Anelastic Impedance

Non-acoustical parameters and sound absorption characteristics of porous polyurethane foams

Inversion method for bottom parameters estimation by reflection model of effective density fluid approximation

Achievement of acoustical properties of foam materials by tuning membrane level: Elaborations, models and experiments

Heuristic Approaches Based on Modified Three-Parameter Model for Inverse Acoustic Characterisation of Sintered Metal Fibre Materials

Improving acoustic wave propagation models in highly attenuating porous materials

Distinctive Approaches to High-Frequency Acoustic Parameter Characterization in Rigid Porous Media

Enhanced Estimation of Fluid Modulus and Porosity Via Novel Nonlinear Elastic Impedance Inversion

Inverse Problem on the Acoustic Parameters of Porous Metals

Hybrid Calculation Method for Normal Absorption Coefficient of Foam Material under Air Backing

Identification of Deep Reservoir Fluids Based on Basis Pursuit Inversion for Elastic Impedance

Comparing acoustic prediction methods for additively manufactured porous structures