Abstract:Heat transport by solid conduction of polyurethane (PU) is a significant fraction of the total thermal conductivity of rigid PU foam. Despite its significance, the intrinsic thermal conductivity of solid PU materials is not well characterized, a circumstance largely attributable to the challenges of preparing fully dense materials that are free of voids due to CO2 gas formation and entrapment caused by the fast reaction between a trace amount of water in a polyol and isocyanate during curing. We developed a protocol to prepare dense homogeneous PU thin films with thicknesses on the order of 100 nm, prepared eight formulations of PU films from a series of polyols and isocyanates with different functionalities, and measured their thermal conductivity, heat capacity, longitudinal speed of sound, and density by time-domain thermoreflectance, picosecond acoustics, and Rutherford backscattering spectrometry, respectively. The thermal conductivity of these PU materials spans a narrow range of 0.19 +/- 0.03 W/(m K). The glass transition temperature of polymer thin films as thin as 100 nm was measured based on a photothermal displacement method. We used data for the longitudinal speed of sound and atomic density to predict the thermal conductivity using the minimum thermal conductivity model (MTCM). While the MTCM agrees with the measured thermal conductivity to within 30%, the variations in the thermal conductivity that we observe experimentally cannot be explained by the small variations in sound velocity and density. Our findings provide new insights into thermal conduction properties of PU solids in rigid PU foam and provide a fundamental basis for the construction of models of the thermal performance and the development of better insulation materials.

Non-acoustical parameters and sound absorption characteristics of porous polyurethane foams

A simplistic unit cell model for sound absorption of cellular foams with fully/semi-open cells

The Influence Of Closed Pore Ratio On Sound Absorption Of Plant-Based Polyurethane Foam Using Control Unit Model

Correlation between the acoustic and porous cell morphology of polyurethane foam: Effect of interconnected porosity

The Influence of Microstructure on Sound Absorption of Polyurethane Foams Through Numerical Simulation

Uncertainty and Sensitivity Analysis of Non-Acoustic Parameters on Acoustic Characteristics Prediction Models for Porous Foam Materials

Effect of pore size polydispersity on the acoustic properties of high-porosity solid foams

Thermal Conductivity of Polyurethane Thin Films

Measurement and modelling of acoustical properties of open-cell metal foams for acous- tic liner applications

Sound Absorption Characteristics of Polymer Microparticles

A semi-analytical model for sound propagation in sintered fiber metals

Sound Absorption Property of Polyurethane Foam with Polyethylene Fiber

Characterization of rigid open-cell foams using direct ultrasonic simulation

The Effect of Pore Numbers in the Cell Walls of Soybean Oil Polyurethane Foam on Sound Absorption Performance

Mechanical Parameters Effects on Acoustic Absorption at Polymer Foam

The Effects of Various Additive Components on the Sound Absorption Performances of Polyurethane Foams

Developments of Sound Absorption of Fine Performance Polyurethane-based Porous Composite Materials

Influence of Foam Structure and Service Environment on Sound Absorption Characteristics of Polyimide Foams

A Dynamic Poroelastic Model for Auxetic Polyurethane Foams Involving Viscoelasticity and Pneumatic Damping Effects in the Linear Regime

Simple Multi-Sections Unit-Cell Model for Sound Absorption Characteristics of Lotus-Type Porous Metals

ImprovedSoundAbsorptionProperties inPolyurethaneFoamsby the Inclusion of Al2O3 Nanoparticles