A reconfigurable wireless power transfer system with constant exciting current for charging multiple batteries
Cang Liang,Huan Yuan,Cheng Zhao,Renjie Zhang,Aijun Yang,Jifeng Chu,Mingzhe Rong,Xiaohua Wang,Aiguo Patrick Hu
DOI: https://doi.org/10.1016/j.ijepes.2024.110084
IF: 5.659
2024-06-24
International Journal of Electrical Power & Energy Systems
Abstract:At present, wireless power transfer (WPT) systems with constant current (CC) or constant voltage (CV) characteristics are typically achieved using a single transmitter and single pickup (STSP) configuration, which cannot transfer power to multiple battery loads simultaneously. In this paper, the LCC-LCC/S reconfigurable topology is proposed to realize the CC-to-CV transition for multiple battery loads. An LCC topology is designed on the primary side to achieve a constant current (0.362A) flowing through the transmitting coil to enable independent operation of power pickups. A reconfigurable LCC/S topology is designed on the secondary side to achieve the CC-to-CV transition of the battery loads. The received power from the pickups remains unaffected when pickups are moved in or out or are in different operating modes (CC or CV). The circuit can maintain zero phase angle (ZPA) operation, which greatly enhances the overall power density of the system. Additionally, detailed design process for the compensation parameters on both the primary and secondary sides are provided. Theoretical analysis proves that good system stability and robustness can be obtained in the case of variable quantity of pickups and quality factors of coils. The experimental prototype was built, with the CC value for the battery load designed at 0.7A and the CV value designed at 8 V. Experimental results demonstrate the smooth CC-to-CV transition of the proposed WPT system (with 3 pickups) at a power output of 15.4 W, and the system's maximum efficiency can reach 75.5 %.
engineering, electrical & electronic