Abstract:Membrane technologies and materials development appear crucial for the hydrogen/natural gas separation in the impending transition to the hydrogen economy. Transporting hydrogen through the existing natural gas network could result less expensive than a brand-new pipe system. Currently, many studies are focused on the development of novel structured materials for gas separation applications, including the combination of various kind of additives in polymeric matrix. Numerous gas pairs have been investigated and the gas transport mechanism in those membranes has been elucidated. However, the selective separation of high purity hydrogen from hydrogen/methane mixtures is still a big challenge and nowadays needs a great improvement to promote the transition towards more sustainable energy source. In this context, because of their remarkable properties, fluoro-based polymers, such as PVDF-HFP and NafionTM, are among the most popular membrane materials, even if a further optimization is needed. In this study, hybrid polymer-based membranes were deposited as thin films on large graphite surfaces. Different weight ratios of PVDF-HFP and NafionTM polymers supported over 200 μm thick graphite foils were tested toward hydrogen/methane gas mixture separation. Small punch tests were carried out to study the membrane mechanical behaviour, reproducing the testing conditions. Finally, the permeability and the gas separation activity of hydrogen/methane over membranes were investigated at room temperature (25 °C) and near atmospheric pressure (using a pressure difference of 1.5 bar). The best performance of the developed membranes was registered when the 4:1 polymer PVDF-HFP/NafionTM weight ratio was used. In particular, starting from the 1:1 hydrogen/methane gas mixture, a 32.6% (v%) H2 enrichment was measured. Furthermore, there was a good agreement between the experimental and theoretical selectivity values.

An insight into separating H 2 from natural gas/H 2 mixtures using Mg-based systems

LiAlH4 As a “microlighter” on the Fluorographite Surface Triggering the Dehydrogenation of Mg(BH4)2: Toward More Than 7 Wt % Hydrogen Release below 70 °C

Exploration of hydrogen generation from an Mg-LiBH4 system improved by NiCl2 addition

Hybrid Fluoro-Based Polymers/Graphite Foil for H2/Natural Gas Separation

MgH2Insights Used for Hydrogen Storage and Catalysis: Preparation, Characterization and Mechanism

In situ creation of catalytic multiphase and multiscale surroundings for remarkable hydrogen storage performance of MgH2

Hydrogen purification by Mg alloy hydrogen adsorbent

MIL-101-Cr/Fe/Fe-NH2 for Efficient Separation of CH4 and C3H8 from Simulated Natural Gas

Metathesis of Mg 2 FeH 6 and LiNH 2 leading to hydrogen production at low temperatures.

Hydrolysis of Mg-based Alloys and Their Hydrides for Efficient Hydrogen Generation

Realizing 6.7 wt% reversible storage of hydrogen at ambient temperature with non-confined ultrafine magnesium hydrides

Enhanced Hydrogen Generation Properties Of Mgh2-Based Hydrides By Breaking The Magnesium Hydroxide Passivation Layer

Heat supply to and hydrogen desorption from magnesium hydride in a thermally insulated container with hot gas flow

Fluorographene Nanosheets Enhanced Hydrogen Absorption and Desorption Performances of Magnesium Hydride

Nanostructured MXene-based materials for boosting hydrogen sorption properties of Mg/MgH2

Ultraselective Carbon Hollow Fiber Membrane for H2 Extraction from Blended Natural Gas

Realizing Nano-Confinement of Magnesium for Hydrogen Storage Using Vapour Transport Deposition

Recent Path to Ultrafine Mg/MgH2 Synthesis for Sustainable Hydrogen Storage

Scaled-Up Synthesis of Nanostructured Mg-Based Compounds and Their Hydrogen Storage Properties

Air exposure improving hydrogen desorption behavior of Mg–Ni-based hydrides

Ultraselective carbon hollow fiber membrane for H 2 extraction from blended natural gas