Abstract:Squeezing, collision, friction and other behaviors are widely present in the post-harvest processing operations of bananas, such as field picking, de-handing, cleaning, packaging and transportation, which will inevitably cause a certain degree of mechanical damage to banana fruits. In view of the difficulty in accurately detecting and quantifying fruit damage in the early stage of production, this paper adopted dynamic finite element numerical simulation and multi-parameter optimization of response surface to carry out simulation analysis on the collision behavior of banana fruit in the post-harvest operations, and the accurate assessment and quantitative characterization of fruit damage degree and erosion rule were carried out. The three-dimensional solid model of banana was established by reverse engineering method based on 3D scanning technology. The multi-scale finite element model of banana was further established by combining the constitutive parameters of banana bunch obtained from quasi-static mechanical experiments. In this study, a total of 27 collision systems including different contact materials, collision angles and impact speeds were developed to quantitatively characterize the changing rules of contact force, equivalent stress, energy, damage volume and bruise susceptibility of fruit under different experimental scenarios. An empirical prediction model for banana fruit's bruise susceptibility was established using response surface optimization methodology, and the comprehensive effects of contact material, collision angle and impact speed on fruit damage were obtained. On this basis, three dynamic collision systems including banana hand and impact panel were developed, and the generation region and erosion rule of equivalent stress of banana hand and impact panel under different encounter postures were further investigated. Finally, the physical verification experiments of banana impact and collision were carried out based on the characteristics of banana growth distribution and movement in the actual post-harvest operations. The experimental results showed that the prediction models of bruising susceptibility of banana fruit under different scenarios achieved a prediction accuracy of more than 80%. The residual stress inside the banana hand under Posture_3 is the smallest (2.55e-2 MPa), and the maximum relative error between the predicted value and the experimental value of bruising susceptibility is less than 8.5%. These results indicate that the multi-scale dynamic finite element model and the empirical prediction model of collision system for bananas are reasonable and correct, and the study have certain reference value for the numerical simulation and quantitative characterization of damage degree of other fruits and vegetables.

Prediction Method for Maize Kernel Impact Breakage Based on High-Speed Camera and FEM

Dynamic Finite Element Simulation of the Collision Behavior and Multi-Parameter Quantitative Characterization of the Damage Degree of Banana Fruit in the Post-Harvest Operations

Theoretical Analysis and Multiscale Finite Element Simulation of the Dynamic Behavior of Maize Kernel Impact on Threshing Tooth

A combined experimental and DEM approach to optimize the centrifugal maize breakage tester

Machine Learning and Experimental Testing for Prediction of Breakage Rate of Maize Kernels Based on Components Contents

Feature Selection, Artificial Neural Network Prediction and Experimental Testing for Predicting Breakage Rate of Maize Kernels Based on Mechanical Properties

Accurate Modelling and Fracture Characteristics of Wheat Grains

Properties and Finite Element Analysis of Corn Kernels under Uniaxial Compression Loads

Research on Impact Prediction Model for Corn Ears by Integrating Motion Features Using Machine Learning Algorithms

Design and Experiment of Corn Low Damage Threshing Device Based on DEM

Application of finite element method to estimate the bruise damage of kiwifruit under drop impact loading

Damage Resistance and Compressive Properties of Bulk Maize Kernels at Varying Pressing Factors: Experiments and Modeling

DEM Simulation of an Impact Crusher Using the Fast-Cutting Breakage Model

Breakage behavior of corn kernels subjected to repeated loadings

Research on the constitutive model of low-damage corn threshing based on DEM

Discrete Element Method Optimisation of Threshing Components to Reduce Maize Kernel Damage at High Moisture Content

HANDY: a device for assessing resistance to mechanical crushing of maize kernel

Effects of Shape Feature on Compression Characteristics and Crack Rules of Maize Kernel

Prediction of Bruise Susceptibility of Harvested Kiwifruit (actinidia Chinensis) Using Finite Element Method

Effect of impact parameters and moisture content on kernel loss during corn snapping

Study on Damage Mechanism and Crack Growth of the Corn Grain