Abstract:Over the past twenty years, metal-organic frameworks (MOFs) have emerged as extensively developed porous class of materials and are increasingly recognized as promising candidates for membrane-based CO2 separation. This potential primarily stems from the ability to deliberately customize their structure and functionalities to enhance interactions with guest molecules. In this study, we explore the use of MOF-525, a porphyrin-based MOF, as a nanofiller in a mixed matrix membrane (MMM) composed of 6FDA-DAM (6FDA: 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride; DAM: 2,4,6-trimethyl-1,3-diaminobenzene) polymer for CO2/N2 and CO2/CH4 separations. This particular MOF is chosen because of the possibility to metalate its porphyrin ring to tailor the interaction between the CO2 molecule and the MOF framework. As a result, the CO2/N2 and CO2/CH4 separation performance of the MMM loaded with metalated MOF-525 can be significantly improved without the necessity to use a very high nanoparticle loading. When compared to the bare polymeric membrane and 2 wt% non-metalated MOF-525 MMM, around 20% improvement in the membrane permeability and selectivity can be observed for the 2 wt% metalated MOF-525 MMM. Further analysis on the gas transport property of the MMM showed that the improvement mainly results from the enhanced CO2 solubility in the MMMs and improved interaction between the metalated MOF-525 and the CO2 molecule. However, it is also found that 2 and 5 wt% are the optimum loading value, above which the interfacial defects between the MOF nanoparticles and the polymers caused by the particle agglomeration starts to appear and thus deteriorating the membrane performance. This is also confirmed through the molecular simulations where some overestimations from the Maxwell model on the membrane permeability is observed particularly at high particle loading, indicating the agglomeration and the build-up of non-selective voids. Despite this, we have successfully shown in this study the high efficacy and efficiency of using metalated porphyrin MOFs for CO2 separation in a MMM since only relatively low particle loading (around 2 wt%) is required to improve the membrane performance.

Nanosheets of a Layered Metal-Organic Framework for Separation of CO2/CH4 Using Mixed Matrix Membranes

Nanosheets of a Layered Metal-Organic Framework for Separation of CO 2 /CH 4 using Mixed Matrix Membranes

Metal-Organic Framework Channelled Graphene Composite Membranes for H-2/Co2 Separation

Metal–organic framework channelled graphene composite membranes for H<sub>2</sub>/CO<sub>2</sub>separation

Mixed Matrix Membrane Based on Cross-Linked Poly[(ethylene glycol) methacrylate] and Metal–Organic Framework for Efficient Separation of Carbon Dioxide and Methane

Enhanced 2-D MOFs nanosheets/PIM-PMDA-OH mixed matrix membrane for efficient CO2 separation

Aligned Metal–Organic Framework Nanoplates in Mixed‐Matrix Membranes for Highly Selective CO2/CH4 Separation

Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

Polymer-functionalized Metal-Organic Framework Nanosheet Membranes for Efficient CO2 Capture

Nanocomposite polymer blend membrane molecularly re-engineered with 2D metal-organic framework nanosheets for efficient membrane CO2 capture

Investigation of MOF-525 and post-metalated MOF-525 as nanofillers in mixed matrix membranes for CO2 separation

Interface regulation of mixed matrix membranes by ultrathin MOF nanosheet for faster CO2 transfer

Graphene-Oxide-Modified Metal–Organic Frameworks Embedded in Mixed-Matrix Membranes for Highly Efficient CO2/N2 Separation

Developing Mixed Matrix Membranes with Good CO2 Separation Performance Based on PEG-Modified UiO-66 MOF and 6FDA-Durene Polyimide

Thermally Annealed High-Aspect-Ratio ZIF-8 Nanoplates-Incorporated Mixed Matrix Membranes for Improved H2/CO2 Selectivity

Microwave-assisted synthesis of metal–organic frameworks UiO-66 and MOF-808 for enhanced CO2/CH4 separation in PIM-1 mixed matrix membranes

Mixed matrix composite membranes with MOF-protruding structure for efficient CO 2 separation

Multivariate Polycrystalline Metal-Organic Framework Membranes for CO<sub>2</sub>/CH<sub>4</sub> Separation

Tuning the Stacking Modes of Ultrathin Two-Dimensional Metal-Organic Framework Nanosheet Membranes for Highly Efficient Hydrogen Separation.

Dual‐Wing Ligand Constructed Metal–Organic Framework Membranes with Finely Tuned Apertures for Natural Gas Separation

Synthesis of Bio-Metal Organic Framework-11 Based Mixed Matrix Membrane for Efficient Carbon Dioxide Separation