Abstract:The increase in the number of readout channels in new detectors, like the Micro Pattern Gas Detectors (MPGD), in the order of several millions, requires a large amount of electrical power to supply the front-end electronics, up to hundreds kW. If this power is generated at long distances from the detector, the voltage drop on the connection cables puts serious constraints to the supply current, to the wire cross-section and to the power distribution. A large amount of voltage drop on the cables, apart an increased power dissipation on wire resistance, determines regulation issues on the load in case of current transients. To mitigate these problems, a new generation DC/DC converter, working in a heavily hostile environment and with a power density greater than 200 W/dm^3, was developed. It is modular, with up to four independent modules, eight channels each, collected in a water-cooled crate, and can supply the load with an adjustable 10 to 12 V output up to 170 W per channel. In this contribution, the design constraints of such a converter are analysed, taking as a basis the environmental, electrical and mechanical requirements of the ATLAS New Small Wheel (NSW) project. Thermal considerations require the converter to be water-cooled, and the dimensional constraints impose the adoption of an innovative design to convey the dissipated heat towards the heat exchanger. The control and monitoring system allows for the full remote management of the converter. Main electrical parameters were measured and are reported. The converter was also characterized in a harsh working environment, with radiation tests in the CERN CHARM facility beyond the limits estimated for ten years operation in ATLAS, and with magnetic field tests in various orientations, using different magnets at CERN up to 1.3 T. A better common mode noise filtering design improvement was implemented after the first characterization. Final performance measurements after the modifications are also reported.

A high frequency radiation hardened DC/DC-converter with low volume air core inductor

A high frequency radiation hardened DC/DC-converter with low volume air core inductor

Fully Integrated High-Voltage Level Shifts and Drivers for Buck Converters.

A 2A 4mhz Dual-Phase ZDS Hysteretic DC-DC Buck Converter with Peak Efficiency above 90%

A 2mhz Constant-Frequency AOT V-2 Buck Converter with Adaptive Dead Time Control for Data Centers

A Radiation-Hardened Buck Converter

A High Density 400 W DC/DC Power Module with Integrated Planar Transformer and Half Bridge GaN IC

MHz Level Two-Stage ZVS DC-DC Converter with Wide Input and Output Voltage Ranges

Step-Down Converter With Stacked Core Transistors for the Innermost Layers of High-Luminosity High-Energy Physics Experiments

A Novel Dual-Llc Resonant Soft Switching Converter For Super High Frequency Induction Heating Power Supplies

High-Efficiency High-Density MHz Cellular DC/DC Converter for On-Board Charger

High-Efficiency High-Density RDCX Modules Cascaded with CHB PFC Stage

High Efficiency High Power Density Cellular 1mhz 380V-12V DCX for Future Data Centers

A High Frequency Multiphase Modular Hybrid Transformerless DC/DC Converter for High-Voltage-Gain High-Current Applications

A High Power Buck Derived Non-Isolated Ac/Dc Led Driver

Design and Integration of Beyond-10MHz High Switching Frequency DC-DC Converter

Modular High Efficiency High Density MHz DCX with Different Output Voltage Adaptation

1 MHz 48–12 V Regulated DCX with Single Transformer

New generation B-Field and RAD-tolerant DC/DC power converter for on-detector operation

New generation B-Field and RAD-tolerant DCDC power converter for on-detector operation

A 10-Mhz Isolated Class DE Resonant DC/DC Converter Based on GaN HEMT