Abstract:Combining the electromagnetic levitation (EML) method with materials processing techniques (pressure die-casting and copper mold solidification), bulk Ti44Al48Nb8 alloy samples with different shapes were prepared, and their microstructure evolution, tensile properties and deformation behavior were systematically investigated. Assisted with a double aberration corrected transmission electron microscope (TEM) and molecular dynamics (MD) simulation, three types of intersecting nanotwins were observed and the formation mechanism of step-like and intersecting nanotwins under both tensile loading and at highly undercooled state were discussed. For the 35 g cone-shaped Ti44Al48Nb8 sample by EML, the microstructure consists of lamellar alpha 2Ti3Al+gamma-TiAl matrix, Nb-rich and Al-rich region, showing a typical peritectic morphology. The average grain size has been significantly reduced after levitation die-casting and copper mold casting, due to the relatively high cooling rate and external stress. The rapidly solidified microstructure of a 0.6 g sample undercooled at 61 K has the similar microstructure with large samples. With the increase of bulk undercooling at 300 K, elemental segregation has been effectively inhibited and the intersecting nanotwins were formed, which shows a unique hierarchical structure. The samples processed by copper-mold casting have good tensile properties, which can be attributed to the refined microstructure, the generation of dislocation and stacking faults, and the formation of intersecting nanotwins. Based on the results of MD simulation and atomic-scale quasi-in-situ TEM observation, the analogous dissociation of dislocation dominated by pole mechanism occurs, resulting in the formation of 1/6 < 112 > Shockley partial dislocation, 1/ 6 < 110 > stair-rod dislocation and 1/3 < 111 > Frank partial dislocation. When samples were highly undercooled, the generated internal stress can facilitate twinning at a much lower stress level, which can be beneficial for the formation of nanotwins at undercooled state.

Experimental and Molecular Dynamics Studies on the Mechanism of Twinning Formation in Fe-Al-based Alloys During Rapid Solidification

Formation of Twin Boundaries in Rapidly Solidified Metals through Deformation Twinning.

Enhanced Tensile Properties and Intersecting Nanotwins Formation Mechanism of Ti44Al48Nb8 Alloy Via Electromagnetic Levitation Processing

Evolution of dislocation and twin structures in Ti3Al during solidification

Mechanisms for Nucleation and Propagation of Incoherent Twins in a CoCrFeNiMo 0.15 High-Entropy Alloy Subject to Cold Rolling and Annealing

The Formation of Twins in Al-10Zn-3Mg-1.8Cu Alloy by Cryomilling

Analysis of Grain Size and Five-Fold Twins During Rapid Solidification Processes Inti3al Alloy.

Formation Mechanism of Hierarchical Twins in the CoCrNi Medium Entropy Alloy

{ 10 1 ̄ 2 } twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy

A geometrical model for grain boundary migration mediated formation of multifold twins

Exploring the Formation Mechanism of Deformation Twins in CrMnFeCoNi High Entropy Alloy

A nucleation mechanism of deformation twins in pure aluminum

Deep Insights into the Twinning Mechanism in High-Performance Al Alloys: A Comprehensive First-Principles Study

Nucleation Mechanism of {101¯2} Twin with Low Schmid Factor in Hexagonal Close-Packed Metals

Deformation-induced Concurrent Formation of 9R Phase and Twins in a Nanograined Aluminum Alloy

A Combined EBSD and Machine Learning Study of Predicting Deformation Twinning in BCC Fe81Ga19 Alloy

Formation mechanism of fivefold deformation twins in nanocrystalline face-centered-cubic metals

Formation of Twinned Dendrites During Unidirectional Solidification of Al-32%Zn Alloy

The Synergistic Effects of Energy Barriers and Shear Directions on Twinning in Face Centered Cubic Metals

Understanding the interaction of {10-12} twins and Mg17Al12 precipitates in magnesium alloys via high-resolution electron microscopy

Simulation of Evolution Mechanisms of Microstructures During Rapid Solidification of Al-Mg Alloy Melt