Abstract:The inorganic powder slurry extrusion printing technique known as robocasting is an interesting method to fabricate complex porous architectures whereby feedstocks containing organic binders and powders are printed and the resulting scaffolds are subjected to sintering. A major limiting factor of this technique is the simultaneous tailoring of vascularization efficacy and osteogenic activity, usually done by adding the secondary phase in the organic slurry before the writing step. Mechanical mixing of biphasic powders is required to avoid compromising the biological performance and physical defects caused by significantly different physicochemical properties. This study addresses this issue by developing a selective ion doping and microstructure tuning for the production of bioceramic scaffolds with a binozzle robocasting process. Different metal ions (Sr2+, Mg2+) were doped into wollastonite (CaSiO3; CSi) powders considering the mechanical stability and bioactive enhancement of the bioceramic scaffolds. Subsequently, the Mg-doped CSi slurries were used as shell-nozzle feedstocks added with 5, 10, and 15 μm diameter polystyrene microbeads that allowed shell-layer micropore production in pore struts during sintering. Finally, the most promising pore-strut microstructures and mechanical evolution of scaffolds were evaluated, and especially the enhanced fibrovascularization potential was confirmed in dorsal muscle embedding model in rabbits. This study may open an avenue to designing multiproperty-tuned macro- and microporous bioceramics for bone regenerative medicine, especially in challenging bone defect conditions.

Preparation of Novel Reticulated Porous Ceramics with Textured Structures Enabled by in Situ Generated Interlocking Al2O3 Platelets

Preparation of Novel Reticulated Porous Ceramics with Textured Structures Enabled by in Situ Generated Interlocking Al2O3 2 O 3 Platelets

A facile approach for preparing Al2O3 reticulated porous ceramics with optimized closed-cell struts and excellent mechanical properties

Silica Nanoparticle-Decorated Alumina Rough Platelets for Effective Reinforcement of Epoxy and Hierarchical Carbon Fiber/epoxy Composites

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Preparation of Al 2 O 3 ceramics with long-range inter-locked platelet structures possessing high porosity and excellent mechanical strength

Preparation of Al2O3 Ceramics with Long-Range Inter-Locked Platelet Structures Possessing High Porosity and Excellent Mechanical Strength

A Novel Approach to Fabricate Porous Alumina Ceramics with Excellent Properties Via Pore-Forming Agent Combined with Sol Impregnation Technique

From Bulk to Porous Structures: Tailoring Monoclinic SrAl2Si2O8 Ceramic by Geopolymer Precursor Technique

Study on the Technology and Performance of 3D-Reticulated Porous SiC/Fe Composite Material

Novel Method To Optimize the Structure of Reticulated Porous Ceramics

Preparation of Large Effective Specific Surface Area Reticulate Porous Ceramics by Polymeric Foam Replication Process Using Recoating Technique

Highly Porous and Mechanically Robust Al2O3-based Foams with Self-Wrinkled and Rough Aperture Surfaces Via Binary Colloidal Self-Assembly of Nanoparticle/gelation Network

PREPARATION OF β-TRICALCIUM PHOSPHATE CERAMICS WITH CONTROLLABLE POROUS ARCHOTECTURE BY THE IN-SITU CONSOLIDATION METHOD

Enhanced mechanical properties and decreased thermal conductivity of porous alumina ceramics by optimizing pore structure

Mechanism of Pore Formation in Novel Porous Permeable Ceramics Prepared from Steel Slag and Bauxite Tailings

Ultrahigh-Strength Porous Ceramic Composites via a Simple Directional Solidification Process

Novel design of elongated mullite reinforced highly porous alumina ceramics using carbonized rice husk as pore-forming agent

Novel ceramic supports for catalyst with hierarchical pore structures fabricated via additive manufacturing-direct ink writing

Highly Porous and Hierarchical MgAl2O4 Ceramics with Improved Pore Connectivity Prepared from Gelled Particle-Stabilized Foams

A novel aqueous gel-casting for fabricating Al2O3-bonded fibrous mullite ceramics