Abstract:This paper explores interactions between multiple operating modes by exploiting a specifically designed piezoelectric motor. The stator includes a hollow polygon bar and two piezoelectric ceramic (PZT) plates. PZT plates were symmetrically bonded onto a brass substrate and used to actuate vibrational modes of stator. The presented motor can operate in three types of vibrational modes which are the second-order in-plane bending modes, the third-order in-plane bending modes and the first-order out-of-plane bending modes. These working modes can be excited independently or simultaneously. Moreover, each group of operating modes can both be actuated by applying single-phase and two-phase driving voltages to PZT plates. In order to produce all these vibration states, the structural parameters of stator are strictly designed to harmonize two eigenfrequencies of each type of vibrational modes by using finite element software ANSYS. After that, displacement characteristics of stator driving particles under different vibration states are all calculated to evaluate mutual effects of three kinds of operating modes. Simulation results reveal that these bending modes can be excited simultaneously and interact with each other. Vibration amplitude and trajectory of stator driving points can also be influenced. The response displacement of stator driving points reaches the maximum value when modes I and II are excited at the same time by supplying single-phase excitation voltage under the premise that its three-dimensional motion trajectory does not deform. The motor performances under this condition are also investigated experimentally. The dimension of the fabricated prototype motor is 10 mm×10 mm×20 mm. The stall torque is 0.2 N·m under 200 V single-phase excitation, when the motor operates in modes I and II simultaneously. The maximum no-load speed is 74 r/min.

Control of a Multimode Piezomotor with the Prestressing Force Automatically Adjusting

Development and Test of a Multimode Piezomotor with Active Contact Force Adjusting

Design and Control of a Piezoelectric Ceramic-actuated and Flexure Hinge-based Micromanipulator

Non-cylinder Holes Precision Machining by Giant Magnetostrictive Components with Sliding Mode Control

A Multi-Mode Self-Centering Piezo Actuator: Design, Analysis and Its Application in Full-Stroke Microscopic Imaging

Research on Control Method for Machining Non-Cylinder Pin Hole of Piston

Tracking Control of Piezoceramic Actuators by Using Preisach Model

Control of a 3D Piezo-Actuating Table by Using an Adaptive Sliding-Mode Controller for a Drilling Process.

A practical application of sliding mode control in the motion control of a high precision piezoelectric motor

An improved dynamic prandtl-ishlinskii hysteresis model and a PID-type adaptive sliding mode controller for piezoelectric micro-motion platform

A new hysteresis modeling and optimization for piezoelectric actuators based on asymmetric Prandtl-Ishlinskii model

Research on interactions between different operating modes of piezoelectric motors

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Model-Based Control for Piezoelectric-Actuated Systems Using Inverse Prandtl-Ishlinskii Model and Particle Swarm Optimization

Prandtl-Ishlinskii Model-Based Adaptive Feedforward Control for Piezoelectric-Stack-actuator-driven Systems

Precision Control of A Piezo-Actuate System Using Fuzzy Sliding-Mode Control with Feedforward Predictor-Based Compensation

Adaptive Robust Precision Motion Control of a Piezoelectric Positioning Stage

Multivariable Switching Control of a Compliant Piezoelectric Microgripper with Force/position Interaction Interferences

Comprehensive study of charge-based motion control for piezoelectric nanopositioners: Modeling, instrumentation and controller design

Integral Sliding Mode Based Precision Motion Control for PMLM.

Modeling and Simo Controlling of Piezoceramic Hysteresis