Abstract:The Pt3Hf compound plays a decisive role in strengthening Pt–Hf alloy systems. Evaluating the stacking fault, dislocation dissociation, and twinning mechanisms in Pt3Hf is the first step in understanding its plastic behavior. In this work, the generalized stacking fault energies (GSFE), including the complex stacking fault (CSF), the superlattice intrinsic stacking fault (SISF), and the antiphase boundary (APB) energies, are calculated using first-principles calculations. The dislocation dissociation, deformation twinning, and yield behavior of Pt3Hf are discussed based on GSFE after their incorporation into the Peierls-Nabarro model. We found that the unstable stacking fault energy (γus) of (111)APB is lower than that of SISF and (010) APB, implying that the energy barrier and critical stress required for (111)APB generation are lower than those required for (010)APB formation. This result indicates that the \(a\left\langle {1\bar{1}0} \right\rangle\) superdislocation will dissociate into two collinear \({a \mathord{\left/ {\vphantom {a 2}} \right. \kern-0pt} 2}\left\langle {1\bar{1}0} \right\rangle\) superpartial dislocations. The \({a \mathord{\left/ {\vphantom {a 2}} \right. \kern-0pt} 2}\left\langle {1\bar{1}0} \right\rangle\) dislocation could further dissociate into a \({a \mathord{\left/ {\vphantom {a 6}} \right. \kern-0pt} 6}\left\langle {\bar{1}\bar{1}2} \right\rangle\) Shockley dislocation and a \({a \mathord{\left/ {\vphantom {a 3}} \right. \kern-0pt} 3}\left\langle {2\bar{1}\bar{1}} \right\rangle\) super-Shockley dislocation connected by a SISF, which results in an APB → SISF transformation. The study also discovered that Pt3Hf exhibits normal yield behavior, although the cross-slip of a \({a \mathord{\left/ {\vphantom {a 2}} \right. \kern-0pt} 2}\left\langle {1\bar{1}0} \right\rangle\) dislocation is not forbidden, and the anomalous yield criterion is satisfied. Moreover, it is observed that the energy barrier and critical stress for APB formation increases with increasing pressure and decreases as the temperature is elevated. When the temperature rises above 1400 K, the \({a \mathord{\left/ {\vphantom {a 2}} \right. \kern-0pt} 2}\left\langle {1\bar{1}0} \right\rangle\) dislocation slipping may change from the {111} planes to the {100} planes.

Pt Schwarz Crystals Stabilized by Minimal-Surface Grain Boundaries and Twins at the Grain Size Limit

Unstable Twin In Body-Centered Cubic Tungsten Nanocrystals

Size-Dependent Dislocation-Twin Interactions

Strengthening-softening Transition and Maximum Strength in Schwarz Nanocrystals

Discrete Twinning Dynamics and Size-Dependent Dislocation-to Twin Transition in Body-Centred Cubic Tungsten

Formation of Stable Schwarz Crystals in Polycrystalline Copper at the Grain Size Limit

In situ atomic scale mechanisms of strain-induced twin boundary shear to high angle grain boundary in nanocrystalline Pt

Stabilizing defective coherent twin boundaries for strong and stable nanocrystalline nanotwinned Cu

Stacking fault, dislocation dissociation, and twinning in Pt3Hf compounds: a DFT study

Mechanical Behaviors Regulation of Triply Periodic Minimal Surface Structures with Crystal Twinning

Twinning and stacking fault formation during tensile deformation of nanocrystalline Ni

Plastic Deformation Through Dislocation Saturation in Ultrasmall Pt Nanocrystals and Its in Situ Atomistic Mechanisms.

Origins of strengthening and toughening effects in twinned nanocrystalline alloys of low stacking fault energy with heterogeneous grain structure

Microtwinning mechanism revealed by its orientation dependence and tension-compression asymmetry in γ′ precipitate-strengthened Ni-based superalloys

Constrained minimal-interface structures in polycrystalline copper with extremely fine grains

Grain-Size-Dependent Zero-Strain Mechanism for Twinning in Copper

High stress twinning in a compositionally complex steel of very high stacking fault energy

Stacking Fault-Mediated Ultrastrong Nanocrystalline Ti Thin Films

New Twinning Route in Face-Centered Cubic Nanocrystalline Metals

Twinning pathways in Fe and Fe–Cr alloys from first-principles theory

Plastic Deformation Mechanisms in Face-Centered Cubic Materials with Low Stacking Fault Energy