Modelling and Application of Typical Nonlinear Torsional Elements in Vibro-Impact Analysis of Pickup Truck Driveline System

Yuanfeng Xia,Zhigang Chu,Jian Pang

DOI: https://doi.org/10.1016/j.jsv.2024.118561

IF: 4.7

2024-01-01

Journal of Sound and Vibration

Abstract:The torsional element method for the dynamic modelling of torsional system was proposed by Crowther and Zhang, which provides a modular modelling approach with high modelling efficiency and has a good application prospect in vibro-impact analysis of vehicle driveline system. The main purpose of this paper is to further enrich the element types of the torsional element method and to establish a nonlinear dynamic model for a pickup truck driveline system by applying the torsional element method to analyze the vibro-impact phenomenon. A general nonlinear clearance element with different contact stiffness and damping, a nonlinear friction element with smooth Stribeck effect and a nonlinear multistage stiffness-damping element with different torque transfer characteristics are developed. A dynamic lumped parametric model with 10 degrees of freedom for a pickup truck driveline system is established by assembling the developed nonlinear torsional elements. The transient vibro-impact phenomenon caused by the clearance, the stick-slip phenomenon caused by the friction and the transient hysteresis cycle phenomenon caused by the nonlinear multistage damper during transient engagement of clutch are numerically investigated. Furthermore, a real-vehicle experimental study is conducted to confirm the transient vibro-impact phenomenon in pickup truck driveline system during transient clutch engagement and to verify the correctness of the dynamic lumped parameter model. On these bases, the influence of the key parameters of the nonlinear torsional element on the transient vibro-impacts are investigated, the effective engineering countermeasures to reduce the vibro-impact of the vehicle driveline system are put forward.