Abstract:In-wheel motor drive (IWMD) is currently a hot topic in electric vehicle research and development for its remarkable advantages. But the extra wheel mass from the motor worsens vehicle ride comfort and road holding. Motor vibration is another problem, which does harm to motor performance and service life. As a trial response to the above problems, a 1/4 car model is established for electrical vehicles driven by suspended in-wheel motors. Five indexes are then employed or defined to evaluate vehicle performances and motor vibration, which are the road holding, vehicle suspension deflection, motor suspension deflection and vertical vibration accelerations of the body and the motors. After sensitivity analysis on motor suspension parameters, optimization is then performed with two different cost functions defined in terms of the amplitude-frequency characteristic of each of the indexes. One function, noted as A-Opt, is the area enclosed by a characteristic curve and frequency axis. The other function, noted as P-Opt, is the summation of the peak values of the characteristic curve. Both the transfer function and the variance of the response are used to describe the vehicle performance. With the former function, focus is mainly put on the frequency response characteristics of the vehicle. With the latter one on the other hand, attention is paid to average amplitude variation for the vehicle on a typical road. Results are compared with those of equivalent electrical vehicles driven either by a centre motor or by fixed in-wheel motors. Results demonstrate that a properly designed motor suspension can effectively improve the performances of vehicles with in-wheel motor drive, including ride comfort, road holding and motor working condition. Furthermore, the second optimization strategy has advantages over the first one with regard to vibration reduction and resonance elimination.

Parameter Optimization on the Torsional Vibration Damper in the Drive Line of a Hybrid Electric Bus

Semi-active Bounded Optimal Control of Uncertain Nonlinear Coupling Vehicle System with Rotatable Inclined Supports and MR Damper under Random Road Excitation

Vibration Performance Optimization of the Semi-Active Suspension with Fuzzy Control Method

Dynamic optimization of tracked vehicle power train based on torsional vibration analysis

Study on optimization algorithm of tuned mass damper parameters to reduce vehicle-bridge coupled vibration

Multi-objective Optimization of Active Dry Friction Damper-Rotor Systems Based on Predictive Control

Multi-objective optimization of active suspension system in electric vehicle with In-Wheel-Motor against the negative electromechanical coupling effects

Low-cost Electric Bus Stability Enhancement Scheme Based on Fuzzy Torque Vectoring Differentials: Design and Hardware-in-the-loop Test

Step-control and Vibration Characteristics of a Hybrid Vehicle Suspension System Considering Energy Consumption

Multi-objective Optimization on the Body Structure of Integral Bus

An active multiobjective real-time vibration control algorithm for parallel hybrid electric vehicle

An experimental investigation of resonance sources and vibration transmission for a pure electric bus

Online optimal tuning of fuzzy PID controller using grey wolf optimizer for quarter car semi-active suspension system

Design, Parameter Optimisation, and Performance Analysis of Active Tuned Inerter Damper (TID) Suspension for Vehicle

Vertical Vibration Analysis on Electric Vehicle with Suspended In-Wheel Motor Drives

Optimisation of an inter-vehicle damper for a high-speed train

Dynamic Performance Analysis of Semiactive Vehicle ISD Suspension Based on the Power-Driven-Damper Strategy

An Optimization Algorithm of Time-Delayed Feedback Control Parameters for Quarter Vehicle Semiactive Suspension System

Damping Coefficient Optimization for the Articulated System of Virtual Track Trains

Integrated design of active suspension parameters for solving negative vibration effects of switched reluctance-in-wheel motor electrical vehicles based on multi-objective particle swarm optimization

A Simplified 4-DOF Dynamic Model of a Series-Parallel Hybrid Electric Vehicle